Oki B4300 OkiLAN 8100e Internal Print Server Installation Instructions - Page 1
Oki B4300 Manual
View all Oki B4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
OkiLAN 8100e Internal Print Server Installation Instructions Print Server Part Number: 70042101 1. Unpack the print server and remove any shipping materials. 2. Turn off the printer, and remove the power cord and interface cable. 3. Remove the access panel screw. the connector on the main board. b. Press down until connectors are fully engaged. c. Make sure the print server is securely installed. 8. Replace the access panel: a. Align panel tabs at bottom. b. Swing panel up and in place. c. Tighten the screw. 6. Tighten the 2 screws at each end of the metal plate. 4. Lift off the access panel. 7. Snap off the access panel tab. 9. To perform a test, press the test button for 3 seconds. The self diagnostic test and configuration settings are printed. 5. Install the print server: To install the printer software and view the SoftNIC User's Guide, see the CD-ROM included with your printer. a. Align the connector at the bottom of the print server with Oki Data Americas, Inc., Mt. Laurel, NJ 08054 http://www.okidata.com 58366101