Oki B6250n B6250 Safety, Warranty, Regulatory Information (E,F,S,P) - Page 8

Reactivity Data, User¸s Responsibility, Preparation Date of MSDS, Personal Protective Equipment - okidata

Page 8 highlights

Carcinogenicity: Not classified as "Carcinogenic" † IARC: Refer to IARC Monographs on the Evaluation Carcinogenic Risks to Humans (WHO International Agency for Research on cancer). NTP: Refer to National Toxicology Program (NTP) Report on Carcinogens (NTP). OSHA: Not available. Reproductive Toxicity: Not classified as "Reproductive and Development chemicals." Teratogenicity: Not available. Mutagenicity (Ames Assay): Negative. Name of Toxicologically Synergistic products: Not available. †Based on toxicity data for similar materials and ingredients. Reactivity Data Stability: Stable Condition to Avoid: Do not expose to temperature above 200°C. Incompatibility (Materials to Avoid): Avoid exposure to strong oxidizers. Hazardous Polymerization: Will not occur. Condition to Avoid: None. Hazardous Decomposition Products: Carbon Oxide. Preventive Measures Personal Protective Equipment Respiratory Protection: Not normally required. For large spills (such as in bulk processing facilities), use dust respirator during cleanup. Protective Gloves and/or Eye Protection: Not normally required. For large spills (such as in bulk processing facilities), use rubber gloves and safety goggles during cleanup. Engineering Controls Ventilation: Outside of normal ventilation, not normally required. In bulk processing facilities, local exhaust ventilation may be required. Other Protective Equipment and/or Hygienic Practices: None Spill Cleanup Small Spills 1. Remove sources of ignition. 2. Sweep up or soak up with a damp (cold water) cloth. Large Spills (such as in processing facilities) 1. Remove sources of ignition. 2. Keep unnecessary and unprotected personnel away from area. 3. Wear protective gear: respirator, rubber gloves, goggles. 4. After removing the bulk of the spill, wipe up remainder with a wet (cold water) cloth. Place waste material in a closed container. Waste Disposal Follow appropriate federal, state and local regulations. Precautions Precautions for Handling or Storage: Do not incinerate toner or a print cartridge. Do not disassemble a print cartridge. Keep in a cool, dry, well-ventilated place. Keep out of reach of children. Other Precautions: None Shipping Information Special Shipping Information: Transport in accordance with national and local regulations. User's Responsibility This bulletin cannot cover all possible situations which the user may experience when using this product. Each aspect of your operation must be examined in regard to if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin must be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practice guidelines and employee instructional programs for your operation. Preparation Date of MSDS __________ Date: November 15, 2007 Prepared by: Oki Data Americas, Inc. Engineering Services Department 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (856) 235-2600 Fax: (856) 222-5320 my.okidata.com 8 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

8 - English
Carcinogenicity: Not classified as ¶Carcinogenic· µ
IARC: Refer to IARC Monographs on the Evaluation
Carcinogenic Risks to Humans (WHO International
Agency for Research on cancer).
NTP: Refer to National Toxicology Program (NTP) Report
on Carcinogens (NTP).
OSHA: Not available.
Reproductive Toxicity:
Not classified as ¸Reproductive
and Development chemicals.¹
Teratogenicity
:
Not available.
Mutagenicity (Ames Assay):
Negative.
Name of Toxicologically Synergistic products:
Not
available.
·Based on toxicity data for similar materials and
ingredients.
Reactivity Data
__________________
Stability:
Stable
Condition to Avoid:
Do not expose to temperature
above 200µC.
Incompatibility (Materials to Avoid):
Avoid exposure
to strong oxidizers.
Hazardous Polymerization:
Will not occur.
Condition to Avoid:
None.
Hazardous Decomposition Products:
Carbon Oxide.
Preventive Measures______________
Personal Protective Equipment
Respiratory Protection:
Not normally required. For
large spills (such as in bulk processing facilities), use
dust respirator during cleanup.
Protective Gloves and/or Eye Protection:
Not
normally required. For large spills (such as in bulk
processing facilities), use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required. In bulk processing facilities, local exhaust
ventilation may be required.
Other Protective Equipment and/or Hygienic
Practices:
None
Spill Cleanup
Small Spills
1.
Remove sources of ignition.
2.
Sweep up or soak up with a damp (cold water) cloth.
Large Spills (such as in processing facilities)
1.
Remove sources of ignition.
2.
Keep unnecessary and unprotected personnel away
from area.
3.
Wear protective gear: respirator, rubber gloves,
goggles.
4.
After removing the bulk of the spill, wipe up
remainder with a wet (cold water) cloth. Place waste
material in a closed container.
Waste Disposal
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling or Storage:
Do not
incinerate toner or a print cartridge. Do not disassemble
a print cartridge. Keep in a cool, dry, well-ventilated
place. Keep out of reach of children.
Other Precautions:
None
Shipping Information
Special Shipping Information:
Transport in
accordance with national and local regulations.
User¸s Responsibility
______________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect
of your operation must be examined in regard to if, or
where, additional precautions may be necessary. All health
and safety information contained in this bulletin must be
provided to your employees or customers. It is your
responsibility to use this information to develop
appropriate work practice guidelines and employee
instructional programs for your operation.
Preparation Date of MSDS
__________
Date:
November 15, 2007
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
my.okidata.com