Oki C5100n C5100 Software Installation Guide - Page 4
Network Install: Hardware
 |
View all Oki C5100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Network Install: Hardware Connect to the Network Port Note: No Ethernet® cable is supplied with the printer. Use an Ethernet cable with two twisted wire pairs and an RJ45 plug. □ Turn the printer off. □ Remove the plug from the Ethernet port (1), then connect your Ethernet cable to the port. □ Connect the other end of the cable to the network port. □ Turn the printer on and wait for the print server's STATUS light (2) to stop blinking. □ Press the TEST button (3) on the print server. The Network Information configuration sheets print. Keep these sheets handy: they contain information you need to set up the printer on your network. 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
4
Network Install: Hardware
Connect to the Network Port
Note:
No Ethernet
®
cable is supplied with the printer. Use an Ethernet cable
with two twisted wire pairs and an RJ45 plug.
□
Turn the printer off.
□
Remove the plug from the Ethernet port (
1
), then connect your Ethernet cable to the port.
□
Connect the other end of the cable to the network port.
□
Turn the printer on and wait for the print server’s STATUS light (
2
) to stop blinking.
□
Press the TEST button (
3
)
on the print server. The
Network Information
configuration sheets print.
Keep these sheets handy: they contain information you need to set up the printer on your network.