Oki C5300n OKI C5300 User's Guide: Windows (Am English) - Page 283
Windows 95 and NT 4.0, Cannot con for USB connection.
View all Oki C5300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
Cannot configure for USB connection. NOTE • Windows 95 and NT 4.0 do not support USB; Windows 98 upgraded from Windows 95 may not support USB. • Windows 98 original installation and Windows Me, 2000, and XP all support USB. Possible cause Remedy Computer does not Check if there is a USB controller in the support USB interface. Windows device manager. USB cable does not meet Use USB cable to specification Ver.1.1. specifications. Interface is disabled. Check that USB interface is set to Enable in the menu (USB MENU → USB → ENABLE). Configuration procedure Configure again from the beginning. was not correctly followed or cancelled. USB cable is disconnected or faulty. Reconnect or try another cable. A USB hub is being used. The printer cannot be used with a USB hub. Connect the printer and computer directly. The USB cable is installed in the Ethernet port. Make sure the USB cable is plugged into the white USB port (1) on the printer: C5300 Troubleshooting • 283