Oki C532dn Wireless LAN Manual - Page 8
Connecting by Manual Setup from Control Panel
View all Oki C532dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting by Manual Setup from Control Panel ••Connecting by Manual Setup from Control Panel Configure the wireless LAN access point information (SSID, encryption method, and encryption key) manually, and connect to the wireless LAN. Follow the procedure below for the setup. 1 Check and write down the SSID, the encryption method and the encryption key by referring to the user manual of the wireless LAN access point. Note •• When the encryption method is WPA-EAP or WPA2EAP, configure from the machine's web page. Use the following procedure if the above screen does not appear or the wireless setup needs to be reset. (1) Press the button on the control panel. (2) Press to select [Wireless Setting], and then press the OK button. Memo •• The SSID is also called the network name, ESSID, or ESS-ID. •• The encryption key is also called the network key, security key, password, or pre-shared key. 2 Confirm that the wireless LAN access point has been activated and is functioning normally. 3 Turn on the power supply to the machine. 4 When the [Wireless Setting] screen is displayed, select [Yes], and press the OK button. 5 Enter the administrator password, select [Enter], and press the OK button. Memo •• The default factory-set password is "999999". The following message will be displayed for about 5 seconds. 6 Select [Enable], and press . OK - 8 -