Oki C830dn C830 Network User's Guide - Page 86
LPD Printing, DHCP/ BOOTP protocol: DISABLE
View all Oki C830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5. Type 1 and press the Enter key. Perform the following settings: Please select (1- 99)? 1 No. Message Value 1 : TCP/ IP protocol : ENABLE 2 : IP address : 192.168.20.127 3 : Subnet Mask : 255.255.255.0 4 : Gateway address : 192.168.20.1 5 : RARP protocol : DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : Auto IP Address : DISABLE 8 : DNS Server (Pri.) : 0.0.0.0 9 : DNS Server (Sec.) : 0.0.0.0 10 : root password : "******" 11 : Auto Discovery Setup 99 : Back to prior menu Please select (1- 99)? 6. Logout from the network interface. Turn the printer off for about 15 seconds and on again to validate the settings. LPD Printing Line Printer Daemon (LPD) is the most common protocol for printing with TCP/IP to a network printer. Refer to the workstation's manual for details of lpr and lp commands. The following explanation in this section uses the printing of print file test.prn with printer name Myprinter_lp as an example. Network User's Guide 86