Home » Oki Manuals » Printers » Oki C9600n » Manual Viewer

Oki C9600n Memory DIMM Installation Instructions - Page 4

Prepare the Printer

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Prepare the Printer 1. Turn off the printer and unplug the power cord. 2. Detach the interface cable from the printer. 3. Remove and save the thumbscrew at the top and bottom which hold the control board in place. 3

Section	Page
Memory DIMM Installation Instructions	1
Getting Started	3
Prepare the Printer	4
1. Turn off the printer and unplug the power cord.	4
2. Detach the interface cable from the printer.	4
3. Remove and save the thumbscrew at the top and bottom which hold the control board in place.	4
4. Open the control board cover by pulling out and toward the left.	5
Install the DIMM(s)	6
1. Locate the DIMM sockets on the control board.	6
2. Push out the white lock tabs at either end of the DIMM socket.	6
3. Remove the DIMM from its shipping package.	7
4. Align the DIMM with the narrow strip (1) on its metallic contact edge toward the front of the control board, then carefully i...	7
5. Repeat steps 2 through 4 for each DIMM being installed.	7
Complete the Installation	8
1. Close the control board cover.	8
2. Reinstall the thumbscrews at the top and bottom of the board.	8
3. Reattach the computer interface cable.	8

Match case Limit results 1 per page

Prepare the Printer

1.Turn off the printer and unplug the power cord.

2.Detach the interface cable from the printer.

3. Remove and save the thumbscrew at the top and bottom which

hold the control board in place.