Oki C9650n Network and Configuration Guide - Page 115
Rinter
View all Oki C9650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
PRINTER MENU: BOOT MENU To access the Boot Menu: 1. Turn the printer off. 2. Press and hold the ENTER key while turning the printer back on. NOTE Keep pressing the Enter button until INITIALISING appears on the display. PARALLEL SETUP ITEM Parallel Bi-Direction ECP Ack Width VALUE Enable Disable Enable Disable Enable Disable Narrow Medium Wide Ack/Busy Timing I-Prime Offline Receive Ack in Busy Ack while Busy 3 microseconds 50 microseconds Disable Enable Disable DESCRIPTION Enables/Disables the Centronics interface. Enables/Disables the bi-directional Centronics interface. Enables/Disables the ECP mode. Sets the ACK width for compatible reception. Narrow = 0.5µs Medium = 1.0µs Wide = 3.0µs Sets the order to output the BUSY signal and ACK signal for compatible reception. Sets the time to enable/disable the I-PRIME signal. Enables/disables a function that maintains the receive-possible state without changing an interface signal even though an alarm occurs. When this is set to Enable, the interface keeps the receive-possible state even when you press the Off-line operating panel switch. The interface sends the BUSY signal only when the reception buffer is full or a service call occurs. This menu is not displayed on a Non-PS machine. Appendix: the printer menu > 115