Oki ES2024 Executive Series Software Installation Guide - Page 4
Network Installation, Install the Ferrite Core
 |
View all Oki ES2024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Network Installation Install the Ferrite Core Important! In order to reduce electromagnetic interference-"noise" that interferes with TVs or other appliances-you must put the enclosed ferrite core on the network cable connected to your printer. This is required by the FCC. Here's how to do it: □ Disconnect the network cable from the printer, if necessary. □ Loop the cable if necessary to keep the ferrite core in place. □ Place the open core about 1 inch from the cable connector on the printer end. □ Press the two halves of the core together until they click shut. ferrot_puggedin.eps 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
4
Network Installation
Install the Ferrite Core
Important!
In order to reduce electromagnetic interference—
“
noise” that interferes with TVs or other appliances—you must put the
enclosed ferrite core on the network cable connected to your printer.
This is required by the FCC.
Here's how to do it:
□
Disconnect the network cable from the printer, if necessary.
□
Loop the cable if necessary to keep the ferrite core in place.
□
Place the open core about 1 inch from the cable connector on the printer end.
□
Press the two halves of the core together until they click shut.
ferrot_puggedin.eps