Oki ML172 Network User's Guide for OkiLAN 6020e - Page 89
Network Preparation, Before You Start, Overview of TCP/IP Configuration, Choosing an IP Address
View all Oki ML172 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Section 4 - Chapter 2 - Configuring the OkiLAN 6020e Chapter 2 Configuring the OkiLAN 6020e Choosing an IP Address Every TCP/IP network device is required to have a unique IP address. The IP address can be permanently stored using one of the following: • OKI OkiNet management utilities for TCP/IP, Novell NetWare or Banyan VINES (may apply to other OkiLAN print server models) • OkiLAN 6020e Configuration utility via telnet. Note: The OkiNet utilities are the easiest way to assign an IP address. Using factory default settings, the OkiLAN 6020e first attempts to determine its IP address (flashing rapid green) using DHCP, RARP, BOOTP or Gleaning. If the OkiLAN 6020e has not resolved its IP address after 2 minutes, it defaults to 198.102.102.254. (This IP address should be used only temporarily for configuration purposes.) To choose an IP address: 1. Select an IP address and hostname for the OkiLAN 6020e. Example: 192.168.42.50 OkiLAN 6020e_name 2. Add the name and IP address to the "/etc/hosts" file of each host that will access the OkiLAN 6020e. Or, if your network uses a name service, add the host name and IP address to the name server. Most TCP/IP networks use the Network Information Service (NIS), Domain Name Service (DNS) or the "/ etc/hosts" database. See your network documentation for instructions. TCP/IP OKI OkiLAN 6020e User's Guide IV - 7