Oki ML620 OkiLAN 6130 Network Card Installation Guide - Page 6
Configuring Your Print Server - gateway
View all Oki ML620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Configuring Your Print Server Using OKI's ExtendView Utility to Configure Your IP Address First, download the ExtendView utility from OKI Data's website at http://www.okidata.com - navigate to the page for your specific product, then click on Drivers, then Utilities,to locate the software. Next, install the ExtendView utility and launch the application. 1. In the ExtendView utility, highlight the device you are going to configure. 2. Choose the configuration option from the dropdown menu. 3. From the Server Configuration box, click Set Permanent. Then, if you wish to change the IP address, Subnet Mask and Default Gateway, you may do so. When the desired options have been set, click OK. The Print Server will automatically be reset at this point, and your options will have been saved. (If you have network configuration questions, please contact your network administrator.) Proceed to the instructions for Installing Your Driver. 6