Olympus D-40 D-40 Zoom Basic Manual (3.8MB) - Page 17

Inserting/ejecting the card, Inserting the card, Ejecting the card

Page 17 highlights

Inserting/ejecting the card Be sure to use a 3V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be formatted with the camera. Do not use a 5 V card or a 2 MB card. 1 Make sure the camera is turned off (i.e. the lens barrier is closed and the monitor if turned off). 2 Open the card cover. Card cover Guideline 3 Inserting the card Insert the card all the way with the contact area facing towards the lens side so that the label's edge is aligned with the guideline (É) printed on the camera. ● Insert the card while keeping it straight. Be sure not to insert it an angle. ● Note the orientation of the card. If it is inserted incorrectly, it may become jammed. ● If the card is not inserted fully, the card cover will not close. Closing the card cover forcibly will damage the card cover. 3 Ejecting the card Grasp the card and pull in straight out. 4 Close the cover tightly. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180

17
Inserting/ejecting the card
Be sure to use a 3V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be
formatted with the camera. Do not use a 5 V card or a 2 MB card.
Insert the card all the way with the contact area
facing towards the lens side so that the label’s
edge is aligned with the guideline (
É
) printed
on the camera.
Insert the card while keeping it straight.
Be
sure not to insert it an angle.
Note the orientation of the card. If it is inserted
incorrectly, it may become jammed.
If the card is not inserted fully, the card cover
will not close. Closing the card cover forcibly
will damage the card cover.
Grasp the card and pull in straight out.
Make sure the camera is turned off (i.e. the lens barrier is closed and
the monitor if turned off).
Open the card cover.
Close the cover tightly.
1
2
3
4
Inserting the card
Ejecting the card
3
Card cover
Guideline