Olympus D-580 D-580 Zoom Reference Manual - Page 142
If an error code is displayed - power problems
UPC - 050332146266
View all Olympus D-580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
If an error code is displayed If an error code appears on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication Possible cause Corrective action The camera is not Disconnect the camera NO CONNECTION connected to the printer correctly. and connect it again correctly. NO PAPER There is no paper in the Load some paper in the printer. printer. NO INK The printer has run out of Replace the ink cartridge ink. in the printer. JAMMED The paper is jammed. Remove the jammed paper. The printer's paper Do not manipulate the cassette has been printer while making SETTINGSS CHANGED removed or the printer has been manipulated settings on the camera. while making settings on the camera. There is a problem with Turn off the camera and the printer and/or printer. Check the printer PRINT ERROR camera. and remedy any problems before turning 8 the power on again. TIPS • If an error code other than those shown above is displayed, refer to "Error codes" (P.142). Direct printing (PictBridge) 141