Olympus DM-20 DM-20 Online Instructions (English) - Page 24
Adjust the start/stop actuation, level
View all Olympus DM-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Using the Variable Control Voice Actuator (VCVA) 7 7 Press the REC button to start recording. When the sound volume is lower than the preset threshold sound level, recording automatically stops after 1 sec approximately, 2 recording automatically pauses after approximately 1 second, and "STANDBY" flashes on the display. The record/play indicator lamp glows when recording starts and flashes when recording pauses. * When the remote controller is connected, the REC indicator lamp on the remote controller lights up but the record/play indicator lamp on the recorder will be switched off. Using the Variable Control Voice Actuator (VCVA) Adjust the start/stop actuation level 7 Press the FF or REW button to adjust the pause sound level during recording. The VCVA level can be set to any of 15 different values. The higher the value, the more sensitive a the recoder to sounds. At the highest value, even b the faintest sound will activate recording. The VCVA pause sound level can be adjusted according to the ambient (background) noise. a Level meter (varies according to the sound volume being recorded) b Start level (moves to the right/left according to the set level) ...Notes • The start/stop actuation level also varies depending on the selected microphone sensitivity mode ( P.28). • To ensure successful recordings, prior testing and adjustment of the start/ stop actuation level is recommended. 24