Olympus FE 250 FE-250 Instruction Manual (English) - Page 50
Using a new card, Lamp indicators
UPC - 050332159877
View all Olympus FE 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Getting to know your camera better Movies Remaining recording time Image quality Image size Internal memory Using a 512 MB card With Without With Without sound sound sound sound SHQ 640 × 480 (30 frames/sec.) 11 sec. 11 sec. 4 min. 42 sec. 4 min. 43 sec. HQ 320 × 240 (30 frames/sec.) 30 sec. 30 sec. 12 min. 42 sec. 12 min. 53 sec. • When the [IMAGE QUALITY] is set to [SHQ], the continuously recording length of the card other than the TypeH is up to approx. 15 seconds. Using a new card • If you use a non-Olympus card or a card used for another application, such as a computer, the message [CARD ERROR] is displayed. To use this card with this camera, use the [FORMAT] function to format the card. g "MEMORY FORMAT (FORMAT) Formatting the internal memory or card" (P. 26) Lamp indicators This camera uses several lamps to indicate the camera status. Lamp Self-timer lamp Card access lamp Green lamp of the monitor Status The lamp lights for approximately 10 seconds, blinks for approximately 2 seconds, and then the picture is taken. Lit (red): Shooting mode Lit (green): Playback mode Unlit: Power is off. Blinking (red): A picture is being recorded, the camera is reading a movie, or images are being downloaded (when connected to a computer). • Do not do any of the following while the card access lamp is blinking. Doing so may prevent the image data from being saved and render the internal memory or card unusable. • Open the battery/card compartment cover • Remove the battery Lit: The focus and exposure are locked. Blinking: The focus and exposure are not locked. • Release your finger from the shutter button, re-position the AF target mark on the subject and press the shutter button halfway again. 50 EN