Olympus Stylus Verve OLYMPUS Master 1.0/Plus Operating Instructions (English) - Page 37

● Transferring Images from a Camera This section describes how to download files from an Olympus digital camera to your computer using a USB cable. To download files, follow the procedure below. You can also back up camera albums (g page 129) using the same procedure. 1 Plug the larger connector marked [A] of the USB cable into the USB port of your computer, and connect the smaller connector marked [B] to the camera. A B Tip For details about the camera-to-computer connection, refer to the operating instructions supplied with the camera. 2 Do one of the following to display the [Transfer Images (From Camera)] window. • From the [File] menu, click [Transfer Images], then [From Camera]. • Click the [Transfer Images] button in the main menu, and click [From Camera] in the [Transfer Images] menu. • In the [Browse] window, click [Transfer] on the toolbar, and then click [From Camera]. The camera is automatically detected, and the [Transfer Images (From Camera)] window appears. This shows thumbnails of all of the images in the camera, and the file name and shooting date below each thumbnail. Note Do not power off the camera or disconnect the interface cable while the software is either starting up or running. This can cause a camera failure or software instability. 3 Select the files you want to download. 4 Configure the transfer settings (g page 42). 37