Olympus T1010 Instruction Manual - Page 3
cm/sec.
UPC - 050332290570
View all Olympus T1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
AC POWER CONNECTION Connect an AC adaptor with output of DC 9V, 600mA and suitable voltage to your area's AC source to the adaptor socket of the unit. Plug the main body of the AC adaptor into a standard wall outlet. H 121 AC adaptor socket/connector DC IN 9V FOOT CONTROL SWITCH AND HEADSET Connect the FOOT CONTROL SWITCH to the jack located on the rear panel of the unit and plug the HEADSET into the jack located on the right side of the unit. When the HEADSET is unplugged, the reproduced sound is switched to the built - in speaker. FOOT CONTROL SWITCH Jack DDf 000 NH OPERATIONS HEADSET Jack 1.Press the POWER Switch until it locks into position. 41 I I Power Switch. 2.Select the tape speed -2.4 cm / sec. or 1.2 cm/sec. by TAPE SPEED Selector. 4.Insert the microcassette with the face to be reproduced up with tape surface forward, then press the cassette gently down, and make sure it is fixed into position. If the tape is excessively slack, insert a pencil into the hub of the reel and turn gently to eliminate the slackened part. (7, TnnT ioonoiouo Tape Speed Selector 3.Open the cassette compartment cover upward with your finger. 2