Olympus WS-802 WS-802 Detailed Instructions (English) - Page 14
Power supply
View all Olympus WS-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Power supply Power supply Inserting the battery This recorder can be used with either a Ni-MH rechargeable battery or AAA alkaline battery. 2 Insert the battery, observing the = and - polarities. 1 For WS-803, WS-802: • When charging the recorder, make sure that the supplied Ni-MH rechargeable battery (BR404) is in place. • The supplied rechargeable battery is not fully charged. Before using the recorder or after long periods of disuse, it is recommended that you continuously charge the battery until full (☞ P.16). 3 Close the battery cover completely by pressing down at A, then sliding the cover towards B. For WS-801: This recorder cannot charge the rechargeable battery. 1 Lightly press down on the arrow and slide the battery cover open. Notes • A manganese battery cannot be used in this recorder. • When the battery is changed, a AAA alkaline battery or Olympus Ni-MH rechargeable battery is recommended. • Be sure to stop the recorder before replacing the battery. Unloading the battery while the recorder is in use may cause a malfunction resulting in the corruption of the file, etc. If you take out EN the battery during recording, you will lose your currently recorded file because 14 the file header will not be able to close.