Onkyo HT-R380 Owners Manual -English - Page 13
Connecting the Speaker Cables, Using Banana Plugs North American models
View all Onkyo HT-R380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting the Speaker Cables Screw-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. (Supplied speaker cables are already stripped.) 1/2" to 5/8" (12 to 15 mm) Using Banana Plugs (North American models) • If you are using banana plugs, tighten the speaker terminal before inserting the banana plug. • Do not insert the speaker code directly into the center hole of the speaker terminal. Push-type speaker terminals Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. (Supplied speaker cables are already stripped.) 3/8" to 1/2" (10 to 12 mm) The following illustration shows which speaker should be connected to each pair of terminals. Surround Surround right left speaker speaker Center speaker Gray Blue Green Red White Purple Front right Front left speaker A speaker A Speakers A Subwoofer Front right speaker B Front left speaker B Speakers B En 13