Onkyo HT-S3800 Operating Instructions - Page 11
About video outputs connection
View all Onkyo HT-S3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 Connecting your equipment Analog audio cables Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals. White (Left) L R AUDIO Red (Right) Digital audio cables Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver. Coaxial digital audio cable COAINXIAL OPTINICAL Optical cable Note • When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket. • When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners. • You can also use a standard RCA video cable for coaxial digital connections. Standard RCA video cables These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio. Yellow VIDEO About video outputs connection This receiver is not loaded with a video converter. When you use HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV. The signals input from the analog (composite) video inputs of this unit will not be output from the HDMI OUT. Playback component 2 4 33 IN HDMI IN VIDEO Terminal for connection with source device OUT HDMI MONITOR OUT Terminal for connection with TV monitor VIDEO The OSD will not appear. TV Video signals can be output. 11