Onkyo TX-NR646 User Manual - Page 67
Equalizer Settings, En-35
View all Onkyo TX-NR646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Setting Item Height Right Surround Right Back Right Back Left Surround Left Subwoofer Default Value 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. ●● This setting cannot be changed if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Select a value between "-15 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. ●● The speaker "Level Calibration" may be unable to be changed depending on the settings in "Configuration" - "Speaker Channels" / "Subwoofer". ●● "Level Calibration" cannot be changed while muting is on. Equalizer Settings Adjust the output volume of each range of each connected speaker. You can adjust the volume of each range of each speaker. You can set three types of equalizer settings in the Presets 1, 2, and 3. ●● You can adjust the bass in the low range frequencies (63 Hz, etc.), and the treble in the high range frequencies (16 kHz, etc.). ●● You can select up to five frequency bands for each speaker. Advanced Settings (Setup Menu) Setting Item Front Center Height Surround Back Subwoofer Default Value 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Setting Details First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". ●● This cannot be selected if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". ●● This cannot be selected if "Configuration" - "Powered Zone 2" is set to "Yes" and Zone2 is set to on. First select the frequency of the speaker from "25 Hz" to "160Hz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". ●● This cannot be selected if "Configuration" - "Subwoofer" is set to "No". ●● The Speaker "Equalizer Settings" may be unable to be changed depending on the settings in "Configuration" - "Speaker Channels" / "Subwoofer". ●● Adjust the volume of each speaker in "Level Calibration". ●● Adjust the volume in 1 dB steps. ●● This is not effective if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. ●● The result may not be as expected depending on the input source and listening mode setting. En-35