Onkyo TX-NR646 Basics Guide - Page 19
Quick Setup Menu - reset
View all Onkyo TX-NR646 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Performing Multi-zone Playback It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room. It is also possible to perform playback only in a separate room. ●● With external players, it is possible to play the same source or different sources in the main room and separate room. ●● With "NET" and "BLUETOOTH", you cannot select different inputs for the main room and separate room. For example, if "NET" has been selected in the main room and then "BLUETOOTH" is selected as playback source in the separate room, the input in the main room will change to "BLUETOOTH" accordingly. ●● When listening to AM/FM broadcasting, you cannot select different stations for the main room and separate room. Therefore broadcasting of the same station will be heard in the both rooms. played in the other room. (To play the same source in the main room and separate room, press ZONE2 twice.) To turn off the function After pressing ZONE2 on the remote controller, press zRECEIVER. Alternatively press OFF on the main unit. ●● If ZONE 2 is on, power consumption during standby becomes larger than normal. ●● If ZONE 2 is turned on when the listening mode of the main room is Pure Audio, it will automatically switch to the Direct listening mode. (European, Australian and Asian models) ●● While ZONE 2 is on, the RI linked system function (interlink between Onkyo components) is disabled. ●● Pressing INPUT SELECTOR on the remote controller while you are using the remote controller for Zone 2 will switch the controlled target to the main room. To control Zone 2 again, press the ZONE2 button to enter the Zone control mode. Playing Back 1. Press ZONE2 on the remote controller, point the remote controller at the main unit and press zRECEIVER. "Z2" lights on the main unit display and the multi-zone function is enabled. (Zone 2 is now on.) 2. Press ZONE2 again on the remote controller and press INPUT SELECTOR of the input to be played in a separate room. ●● If you turn the unit to standby during multi-zone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Performing steps 1 and 2 while the unit is in standby also switches the playback mode to playback in a separate room only. To play the same source in the main room and separate room, hold down ZONE2 for approximately 3 seconds. To control on the main unit: press ZONE2 and within 8 seconds, press the input selector button of the source to be 7 Quick Setup Menu You can perform common settings on the TV screen while playing. 1. Press Q on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Quick Setup Listening Mode Audio HDMI Information MOVIE/TV MUSIC GAME BD/DVD 2. Select the item with the cursors of the remote controller and press ENTER to confirm your selection. ●● To return to the previous screen, press RETURN. 3. Select the setting with the cursors buttons of the remote controller. Step 3: Playing Back Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC" and "GAME". After selecting the Listening Mode, press ENTER button to confirm. ●● It cannot be set when audio is played from the TV's speakers. Audio: You can perform various audio settings including audio quality and speaker level adjustment. ●● You cannot select this item when audio is output from the TV's speakers. Bass, Treble: Adjust volume of the front speaker. ●● It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. Phase Matching Bass: Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained. ●● It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. Center Level, Subwoofer Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode. ●● Changes may not be possible depending on the settings in speakers. ●● This setting is not possible during MUTING or when using headphones. A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input selector. ●● It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. AccuEQ Room Calibration: Enable or disable the settings made by automatic speaker setting. To enable them, you should normally select "On (All Ch)", and to disable just the front speakers, you should select "On (ex. L/R)". The setting can be separately set to each input selector. ●● This setting cannot be selected if the automatic speaker setting has not been performed. ●● It cannot be set if headphones are connected or the listening mode is Pure Audio (European, Australian and Asian models) or Direct. Equalizer: Assign the equalizer settings adjusted in "Setup"-"2. Speaker"-"Equalizer Settings" to "Preset1" to "Preset3". The same sound field setting is applied to all En-19