Onkyo TX-NR656 User Manual - Page 16
Multi-zone Connection
View all Onkyo TX-NR656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Multi-zone Connection You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 The audio from AV components can only be output to ZONE 2 when the input is analog or 2 ch PCM audio signals. 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector. Connections with an AV component When outputting the audio of an external AV component to ZONE 2, you need to connect using an analog audio cable or digital optical cable, or digital coaxial cable. MAIN ROOM ZONE2 ZONE 2 LINE OUT It is possible to play 2 ch source in a separate room while 7.1 ch source is being played in the main room. Connect the ZONE 2 LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier in a separate room with an analog audio cable. 3 2 1 LINE IN ZONE SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources. 0 You can play through a maximum of 5.1 channels in the main room during ZONE 2 playback. Listening modes such as the Dolby Atmos modes cannot be selected. 0 When Bi-Amping connection is used for the front speakers, you cannot output to speakers in ZONE. BD/DVD OR ZONE SPEAKER ZONE2 LINE OUT 1 Digital coaxial cable, 2 Analog audio cable, 3 Speaker cable 16 Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (ÄP19) to enjoy this feature. 0 When you have connected AV components to this unit using digital optical cables or digital coaxial cables, change the settings on the AV components so that they output PCM signals if you want to output their audio to ZONE 2.