Onkyo TX-NR676 Owners Manual - English - Page 21

> Before Start > Part Names > Install > Initial Setup > Playback a (North American (European, and Taiwanese Australian and models) Asian models) c d (Taiwanese models) b b a AM loop antenna, b Indoor FM antenna, c Ethernet cable, d Power cord 6. Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. Network Hookup Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN). You can enjoy network features such as internet radio by connecting the unit to the network. If you connect by wired LAN, connect with an Ethernet cable to the ETHERNET port as shown in the illustration. To connect by Wi-Fi, then after selecting "Wireless" in "3. Network Connection" (P23) in Initial Setup, select the desired setting method and follow the onscreen instructions to configure the connection. Power Cord Hookup The power cord must be connected only after all other cable connections are completed. 0 Taiwanese models include removable power cords. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord. En 21