Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver Instruction Manual - Engli - Page 151
V Trigger, Bluetooth Wakeup Default Value: Off, Zone Default Value: Main
View all Onkyo TX-RZ50 9.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
5. Hardware Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. This is effective when "Bluetooth" -"Bluetooth Receiver" is set to "On". On When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate. Off When this function is not used • This setting is fixed to "Off" if "Bluetooth" -"Bluetooth Receiver" is set to "Off". • This setting is also fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" - "Auto Input Change" is set to "Off". • Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can be selected when the network function is activated. Setup 5. 12V Trigger Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER OUT jack. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. Zone (Default Value: Main) Off Main Zone 2 Zone 3 All When the control signal is not output When controlling the power of external devices linked to the input selection in the main room When controlling the power of external devices linked to the input selection in ZONE 2 When controlling the power of external devices linked to the input selection in ZONE 3 When controlling the power of external devices linked to the input selection in the main room or in ZONE 2/ZONE 3 151