Onkyo TX SR606 Instruction Manual - Page 39
Continued - complete set
UPC - 751398008092
View all Onkyo TX SR606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
First Time Setup-Continued 2 Put the speaker setup micro- 4 phone at measurement point 1 (page 38), and connect it to the SETUP MIC jack. Auto Speaker Setup AUDYSSEY Please place microphone at center of listening area at ear height. Push Enter : Next Notes: • For all measurements, the micro- phone capsule should point directly at the ceiling. • If there's an obstacle between the 5 microphone and any speaker, the automatic setup will not work cor- rectly. Set up the room as you would when enjoying a DVD. • Positioning the microphone close to where your ears would normally be will provide better results. You can adjust the height of the microphone by using a tripod or level table. • Do not attempt to hold the microphone in your hand during measure- ments as this will produce incorrect results. 3 Press [ENTER]. 6 The automatic speaker setup starts. Auto Speaker Setup AUDYSSEY Do not unplug microphone. Please keep quiet. Now Measuring. . . A test tone is output by each speaker in turn, as the Audyssey 2EQ function determines which speakers are connected. This takes a few minutes. Note: • Quiet the room as much as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices, and refrain from talking. The following screen appears. Auto Speaker Setup AUDYSSEY Please place microphone at right end of listening area at ear height. Push Enter : Next Move the speaker setup microphone to measurement point 2 (page 38), then press [ENTER]. Audyssey 2EQ performs more measurements. This takes a few minutes. The following screen appears. Auto Speaker Setup AUDYSSEY Please place microphone at left end of listening area at ear height. Push Enter : Next Move the speaker setup microphone to measurement point 3 (page 38), then press [ENTER]. Audyssey 2EQ performs more measurements. This takes a few minutes. When the measurements are complete, the following screen appears. Auto Speaker Setup AUDYSSEY Calculating... 39