Onkyo TX SR703 Owner Manual - Page 75
Equalizer Settings
View all Onkyo TX SR703 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
@"EWBODFE@&O 1BHF .POEBZ "VHVTU 1. Advanced Setup-Continued Equalizer Settings These settings are set automatically by the Automatic Speaker Setup function (see page 40). With these settings, you can adjust the tone of each speaker. The volume of each speaker can be set on page 73. 1 RECEIVER Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. 2 ENTER Use the Up and Down [ ]/[ ] buttons to select "3. Speaker Setup," and then press [ENTER]. The Speaker Setup menu appears. ENTER 3 ENTER Use the Up and Down [ ]/[ ] buttons to select "Equalizer Settings," and then press [ENTER]. The Equalizer Settings menu appears. 5 ENTER ENTER Use the Down [ ] button to select "b. Channel," and then use the Left and Right [ ]/[ ] buttons to select a speaker. 3-6.Equalizer Settings a.Use Settings:Manual b.Channel :Left c. 80Hz : 0dB d. 250Hz : 0dB e. 800Hz : 0dB f.2.5kHz : 0dB g. 8kHz : 0dB 6 ENTER 7 ENTER Use the Up and Down [ ]/[ ] buttons to select a frequency, and then use the Left and Right [ ]/[ ] buttons to cut or boost that frequency. Each band can be cut or boosted from -6 dB to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 80Hz) affect bass sounds; high frequencies (e.g., 8kHz) affect treble sounds. Use the Up [ ] button to select "b. Channel," and then use the Left and Right [ ]/[ ] buttons to select another speaker. Repeat steps 6 and 7 for each speaker. ENTER ENTER 4 ENTER Use the Left and Right [ ]/[ ] buttons to set the "a. Use Settings" option to: Off: Equalizer off, flat response. Auto: The equalizer for each speaker is set automatically by the Automatic Speaker Setup function. Manual: The equalizer for each speaker can be set manually. If you selected Manual, continue with the next step. If you selected Off or Auto, go to step 8. 8 Press the [SETUP] button. Setup closes. Notes: • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. • On the TX-SR803/803E, the Equalizer Settings have no effect on 176.4/192 kHz signals. 75