Optoma EP709 User Manual - Page 3

Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning - Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. Warning - To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Warning - When changing the lamp, please allow unit to cool down, and follow all changing instructions. Warning - This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages (refer to page 34). Warning - Reset the "Reset Lamp Hours" function from the On Screen Display "Management II" menu after replacing the lamp module (refer to page 25). Warning - When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Warning - Turn on the projector first and then the signal sources. Warning - Do not use lens cap when projector is in operation. Warning - When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp". (see page 35)  English