Optoma EP728 User's Manual - Page 1
Optoma EP728 Manual
UPC - 796435116675
View all Optoma EP728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
INSTALLATION INSTRUCTIONS Model: CM-E73X Compatible Models: Optoma EP731/732/732H/737/738/739/H30 READ THIS BEFORE YOU START X Maximum weight limit is 20 pounds (9.1 kg). Do not exceed this limit. X Always use caution and care when working with heavy projectors. DO NOT TAKE UNNECESSARY RISKS! X Once you have chosen a location for the mount, determine the construction of the ceiling. • Solid wood surface: a beam, or a wood joist inside the wallboard. • Wallboard: sheet rock, plasterboard or paneling. • Masonry: plaster, cement or brick. X It is recommended that the ceiling mount be mounted to a ceiling beam or wood joist. X CAUTION: Use only the supplied TOGGLER® TC® drywall/plasterboard anchors to support the ceiling mount screws. Use them as anchors to fasten the ceiling mount to sheet rock, plaster board or paneling. Use the TOGGLER® Alligator® anchor for solid wood or masonry. (See enclosed TOGGLER® Anchoring Solutions brochure.) X Before installing the ceiling mount, make sure the mounting location is sturdy enough to support the projector. If you are not sure that your location will hold the projector's weight, contact a professional contractor for advice. X Recommend maximum extension; do not exceed 15 inches if the base join is angled. TOOLS REQUIRED • Hex wrench (included). • Drill with a 1/4" bit for the AF6 Alligator® anchors. • Phillips screwdriver • Two crescent or 3/4" open-end wrenches. • Drill with a 5/16" bit for the TC® anchors T.M.