Optoma HD28DSE Data Sheet - Page 2

Optical/technical Specifications, Compatibility Specifications, Physical Specifications - manual

Page 2 highlights

Breathtaking Clarity, Depth and Realism - HD28DSE OPTICAL/TECHNICAL SPECIFICATIONS Display Technology Single 0.65" 1080p chip, DLP® Technology from Texas Instruments Image Enhancement Integrated DarbeeVision™ Image Enhancement Processor technology with Deep Color, 30-bit 4:4:4, split screen demo mode, slider demo mode, and 3 enhancement profiles (Hi-Def, Gaming & Full Pop) Native Resolution Full HD 1080p: 1920 x 1080 (Video Timing) Maximum Resolution Full HD 1080p: 1920 x 1080 (Video Timing) Maximum Resolution WUXGA: 1920 x 1200 (Graphics Timing) Brightness 3000 lumens Contrast Ratio 30,000:1 (full on/full off) Displayable Colors 1.07 Billion Color Wheel 6 Segment; RYGCWB Lamp Life* 8000/6000/4000 hrs (Bright+Dynamic = ECO+/ECO/Bright) Projection Method Front, rear, ceiling mount, table top Keystone Correction ±40° Vertical and Horizontal Geometry 4 Corner Adjustment Uniformity 75% Offset 116.5% Aspect Ratio 16.9 (Native), 16:10, 4:3, LBX, Auto Throw Ratio 1.48~1.62 D/W (±5% variance) Projection Distance 59"~394" Image Size (Diagonal) 41.8"~305" Projection Lens F=2.5-2.67, f=21.9-24 mm, manual zoom and focus Optical Zoom 1.1x Digital Zoom 0.8-2.0 Speaker One 10-Watt Speaker Noise Level 29dB Remote Control Backlit IR remote control Operating Temperature 5~ 40°C Power Supply Auto-ranging: 100V ~ 240V ± 10%, 50-60Hz Power Consumption 238W Typical ( Bright mode), 262W Max (Bright mode), 195W Typical (Eco mode), 215W Max (Eco mode) High Altitude Sea Level to 10,000 feet (@23°C); must manual switch to high altitude mode @5000 feet & above COMPATIBILITY SPECIFICATIONS Computer Compatibility WUXGA, UXGA, SXGA+, WXGA+, WXGA, SXGA, XGA, SVGA, VGA Video Input Compatibility NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) 3D Compatibility† S upports all HDMI 1.4a mandatory 3D formats (Frame pack, side-by-side, top-bottom) and up converts frame rate from 60 Hz to 120 Hz or 24 Hz to 144 Hz (i.e 60 or 72 frames per eye). 3D glasses are needed and are sold separately. Refer to user manual for details. Vertical Scan Rate 24-85 Hz (120 Hz for 3D feature projector) Horizontal Scan Rate 15.375-91.146 KHz User Controls Complete on-screen menu, adjustments in 27 languages I/O Connection Ports 2x HDMI 1.4a with MHL (on port 1), 3D Sync Port, mini USB, USB-A (USB Power Only), 12V Trigger USB Power Output Must be enabled in OSD. Available settings: On, Off, Auto - ON setting = MHL is disabled on HDMI 1, Off setting = MHL enabled on HDMI 1, and Auto setting = MHL on HDMI 1 has priority over USB power. Loop Through (Audio) Yes *Lamp-life is dependent on many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time. † 3D content can be viewed with either RF or DLP Link active shutter 3D glasses when projector is used with a compatible 3D player. RF 3D glasses require the use of the RF 3D emitter. Please visit www.OptomaUSA.com for more information. 2 6 3 7 4 8 1 9 5 1. Security Bar 2. 3D SYNC 3. 12V Out 4. USB Power (5V out) 5. Audio-Out (3.5 mm) 6. HDMI 1-In (MHL) 7. mini USB (service only) 8. HDMI 2-In 9. Power Power On User1 Brightness Keystone Mute Dynamic Black Source Menu HDMI 1 VGA 1 VGA 2 Power Off User2 User3 Contrast Mode Aspect Ratio 3D Depth Sleep Timer Re-sync Four Directional Select Keys HDMI 2 YPbPr Video PHYSICAL SPECIFICATIONS Security  Kensington® lock port, security bar, and keypad lock Weight 5.7 lb (2.6 kg) Dimensions (W x H x D) 12.4" x 4.5" x 8.8" (315 x 114 x 223 mm) Warranty 1-Year Limited Parts and Labor, 90-Days on Lamp In the Box (Standard Accessories)  HD28DSE projector, lens cap, AC power cord, remote control, batteries for remote, multilingual CD-ROM, user's manual, quick start card, and warranty card Optional Accessories Universal ceiling mount, Wireless HDMI system, DLP® Link™ 3D glasses, RF 3D glasses, RF 3D emitter, Carrying case, HD Cast Pro Accessory Part Numbers Lamp: SP.77011GC01 Remote: SP.8ZE01GC01 Mount: BM-5001U Carrying case: SP.8VH03GC01 RF 3D emitter: BC300 RF 3D glasses: ZF2300GLASSES DLP® Link™ 3D glasses: ZD302 Wireless HDMI system: WHD200 Wireless streaming dongle: HDCastPro-Black UPC 796435 81 230 0 www.OptomaUSA.com Copyright © 2015 Optoma Technology, Inc. DLP® and the DLP logo are registered trademarks of Texas Instruments™. All other trademarks are the property of their respective owners. All specifications subject to change at any time. 09162015

  • 1
  • 2

Breathtaking Clarity, Depth and Realism — HD28DSE
OPTICAL/TECHNICAL SPECIFICATIONS
Display Technology
Single 0.65" 1080p chip, DLP
®
Technology from Texas
Instruments
Image Enhancement
I
ntegrated DarbeeVision™ Image Enhancement
Processor
technology with Deep Color, 30-bit 4:4:4, split screen
demo mode, slider demo mode, and 3 enhancement
profiles (Hi-Def, Gaming & Full Pop)
Native Resolution
Full HD 1080p: 1920 x 1080 (Video Timing)
Maximum Resolution
Full HD 1080p: 1920 x 1080 (Video Timing)
Maximum Resolution
WUXGA: 1920 x 1200 (Graphics Timing)
Brightness
3000 lumens
Contrast Ratio
30,000:1 (full on/full off)
Displayable Colors
1.07 Billion
Color Wheel
6 Segment; RYGCWB
Lamp Life
*
8000/6000/4000 hrs
(Bright+Dynamic = ECO+/ECO/Bright)
Projection Method
Front, rear, ceiling mount, table top
Keystone Correction
±40° Vertical and Horizontal
Geometry
4 Corner Adjustment
Uniformity
75%
Offset
116.5%
Aspect Ratio
16.9 (Native), 16:10, 4:3, LBX, Auto
Throw Ratio
1.48~1.62 D/W (±5% variance)
Projection Distance
59"~394"
Image Size (Diagonal)
41.8"~305"
Projection Lens
F=2.5–2.67, f=21.9–24 mm, manual zoom and focus
Optical Zoom
1.1x
Digital Zoom
0.8–2.0
Speaker
One 10-Watt Speaker
Noise Level
29dB
Remote Control
Backlit IR remote control
Operating Temperature
5~ 40°C
Power Supply
Auto-ranging: 100V ~ 240V ± 10%, 50-60Hz
Power Consumption
238W Typical ( Bright mode), 262W Max (Bright mode),
195W Typical (Eco mode), 215W Max (Eco mode)
High Altitude
Sea Level to 10,000 feet (@23°C); must manual switch to
high altitude mode @5000 feet & above
COMPATIBILITY SPECIFICATIONS
Computer Compatibility
WUXGA, UXGA, SXGA+, WXGA+, WXGA, SXGA, XGA,
SVGA, VGA
Video Input Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV
(720p, 1080i/p)
3D Compatibility
Supports all HDMI 1.4a mandatory 3D formats (Frame
pack, side-by-side, top-bottom) and up converts frame
rate from 60 Hz to 120 Hz or 24 Hz to 144 Hz (i.e 60 or
72 frames per eye). 3D glasses are needed and are sold
separately. Refer to user manual for details.
Vertical Scan Rate
24–85 Hz (120 Hz for 3D feature projector)
Horizontal Scan Rate
15.375–91.146 KHz
User Controls
Complete on-screen menu, adjustments in 27 languages
I/O Connection Ports
2x HDMI 1.4a with MHL (on port 1), 3D Sync Port, mini
USB, USB-A (USB Power Only), 12V Trigger
USB Power Output
Must be enabled in OSD. Available settings: On, Off,
Auto - ON setting = MHL is disabled on HDMI 1, Off
setting = MHL enabled on HDMI 1, and Auto setting =
MHL on HDMI 1 has priority over USB power.
Loop Through (Audio)
Yes
Warranty
1-Year Limited Parts and Labor, 90-Days on Lamp
In the Box (Standard Accessories)
HD28DSE projector, lens cap, AC power cord, remote control, batteries for
remote, multilingual CD-ROM, user’s manual, quick start card, and warranty card
Optional Accessories
Universal ceiling mount, Wireless HDMI system, DLP
®
Link™ 3D glasses, RF 3D
glasses, RF 3D emitter, Carrying case, HD Cast Pro
Accessory Part Numbers
Lamp: SP.77011GC01
Remote: SP.8ZE01GC01
Mount: BM-5001U
Carrying case: SP.8VH03GC01
RF 3D emitter: BC300
RF 3D glasses: ZF2300GLASSES
DLP
®
Link™ 3D glasses: ZD302
Wireless HDMI system: WHD200
Wireless streaming dongle: HDCastPro-Black
UPC
796435 81 230 0
www.OptomaUSA.com
Copyright © 2015 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of
Texas Instruments
. All other trademarks are the property of their respective owners. All specifications
subject to change at any time. 09162015
†3D content can be viewed with either RF or DLP Link active shutter 3D glasses when projector
is used with a compatible 3D player. RF 3D glasses require the use of the RF 3D emitter.
Please visit www.OptomaUSA.com for more information.
*Lamp-life is dependent on many factors, including lamp mode, display mode, usage,
environmental conditions and more. Lamp brightness can decrease over time.
1
6
7
8
9
2
3
4
5
1. Security Bar
2. 3D SYNC
3. 12V Out
4. USB Power (5V out)
5. Audio-Out (3.5 mm)
6. HDMI 1-In (MHL)
7. mini USB (service only)
8. HDMI 2-In
9. Power
Power On
Power Off
Mode
User3
User2
Re-sync
Four Directional
Select Keys
3D Depth
Sleep Timer
Aspect Ratio
Contrast
Mute
User1
Dynamic Black
Brightness
HDMI 1
VGA 1
HDMI 2
VGA 2
Menu
Keystone
Source
YPbPr
Video
PHYSICAL SPECIFICATIONS
Security
Kensington
®
lock port, security bar, and keypad lock
Weight
5.7 lb (2.6 kg)
Dimensions (W x H x D)
12.4" x 4.5" x 8.8" (315 x 114 x 223 mm)