Optoma HD65 User's Manual - Page 30

User Controls Display V Image Shift Shift the projected image position vertically. V Keystone Press the or squarer image. to adjust image distortion vertically and makes a PC Mode This Mode is only for use when using this projector unit with a PC signal, either Analogue connector.  "SuperWide" is  Wide: If your PC output is a wide screen format resolution, you must select this setting. "Off" as default. Examples of Wide screen resolutions are: 1280 x 720 / 1920 x  How to use "Super- 1080. Wide" 1. Use a 2.0:1 screen that buy from Op-  Normal: If your PC output is a Normal (4:3) resolution you must select this setting. toma Examples of Normal resolutions are: 640 x 480 / 800 x 600 / 2. Enable Super- 1024 x 768 / 1152 x 864 / 1280 x 1024 / 1400 x 1050. Wide feature to * All supported resolutions are listed on pages 45-46. Auto 3. Use zoom ring in top of projector to fit the image width to the screen width SuperWide  Off: The format can be chosen your desired aspect ratio includ- ing 4:3, 16:9, LBX and Native.  On: The format only can be chosen 4:3 and 16:9.  Auto: To solve the differences of the film formats, the option can keep the format in the same ratio. English 30