Optoma PT105 User's Manual - Page 3
power rating
View all Optoma PT105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT ELECTIC SHOCK, IF THE UNIT IS PROVIDED WITH A POLARIZED PLUG, DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLETS UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PARTOF THE BLADES EXPOSED. TO PREVENT FIRE OR SHOCK HAZARD. DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF PLUG TO THEWIDE SLOT, AND FULLY INSERT THE PLUG. This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. AUTI • N Warning : To reduce the risk of electric shock, do not remove cover (or RISK OF ELECTRIC SHOCK back). No user serviceable parts inside. Refer servicing to qualified DO NOT OPEN service personnel. A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Install the projector and AC/DC Adapter in accordance with the manufacturer's instruction. 6. Only use the accessories specified by the manufacturer. 7. The power rating of the projector is located on its bottom enclosure and the power rating of the AC/DC Adapter is located on its rear enclosure. 8. The projector and AC/DC Adapter shall not be exposed to dripping and splashing and that no objects filled with liquids, such as vases, shall be placed on the projector and AC/DC Adapter. 9. To completely disconnect the power input, the mains plug of the AC/DC Adapter must be disconnected from the mains supply. 10. The mains plug of the AC/DC Adapter should not be obstructed AND should be easily accessible during intended use. 11. Do not block any ventilation openings. 12. Do not install the projector and AC/DC Adapter near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 13. Keep plastic, paper, and combustible materials at least 0.5m (2ft.) away from the projector lens and vents. 14. Unplug the projector and AC/DC Adapter during lightning storms or when unused for long periods of time. 15. Clean both the projector and AC/DC Adapter only with a dry cloth. 16. Do not look directly into the lens when the projector is ON. 17. Servicing is required when the projector and/or AC/DC Adapter have/has been damaged. Refer all servicing to qualified personnel. EN-2