Optoma Pico PK102 User's Manual - Page 4
Harging, Attery, Onnect, Ource - led projector
View all Optoma Pico PK102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Charging the Battery 1 2 VGA \ USB IN DC IN 3 Connect input source - (Video in) 1. Remove protection cap and insert the plug. (~) 2. Connect the charger. (~) 3. D uring charging the LED indicator lights red. () Projector will not charge while operating. 4. The LED Charge Indicator will go off when battery is fully charged. This process may take up to 2.5 hours 1. For more LED indicator, see page 7. 2. The indicator will flash red when no battery is installed. 1 2 1 VOLUME CONTROL 1. Connect the AV input source. AV IN (~) 2. Connect to external speaker using FOCUS AVII cable (optional) and use the toggle to disable/enable the PK102 internal speaker ( ) or AV IN 1. All other brand and product names are trademarks or registered trademarks of their respective companies. 2. The connecting cable of video output device is not supplied, please contact their service center. 3. iPod nano/iPod touch/iPhone/iPod classic (version 5 and above) 4. Designed for iPod/iPhone/Mobile phone/ FOCUSPMP with TV out functions. Using with device with audio signal voltage > 0.3Vrms is not recommended. 4 2 5 VGA \ USB IN DC IN VGA \ USB IN DC IN MOLEX MOLEX The PK102 can also be charged via USB to DC cable ( ) or 1 AV IN AV IN VOLUME CONTROL iPod FOCUS 1 2 2 Connect input source - (VGA/USB/Component in) Connect input source Data transfer or FOCUS 1. Connect the VGA/USB/ VGA \ USB IN DC IN Component source device. Insert universal connector 1 with arrow mark facing up. Supported formats VGA: 640x480@60Hz, 800x600@60Hz 2 or Supported Files Photos: bmp, jpeg Video: M-JPEG, MPEG4, RMVB, RM, WMV, Xvid, Mov by Optoma Video encoder VGA \ USB IN DC IN 2 1 USB device: Support USB Flash Drive up to 5V/150mA, but does not support USB Hard Disk Drive or VGA \ USB IN DC IN 1 Supported formats Component input resolution must be 480i/p MOLEX 1. Connect laptop or PC for data transfer to the PK102 internal VGA \ USB IN DCIN memory using supplied Male USB 1 Cable The laptop/PC can only detect the input source when the PK102 is switched on. This should stop the projection at the mean 2 time. 2 4