Optoma TX785 User's Manual - Page 70
Pull out the lamp module., To replace the lamp module, reverse the previous steps.
UPC - 796435411459
View all Optoma TX785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Appendices 4 1. Switch off the power to the projector by pressing the Power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Unlock the lamp cover. 5. Pull up and remove the cover. 6. Use a screwdriver to remove the screws from the lamp module. 7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. After replacing the lamp, the lamp hours counter must be reset. See page 54 for more information. English 70
English
ΒΆ0
4
1. Switch off the power to the projector by pressing the Power button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Unlock the lamp cover.
5. Pull up and remove the cover.
6. Use a screwdriver to remove the screws from the lamp module.
7. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
After replacing the lamp, the lamp hours counter must be reset. See
page 54 for more information.
Appendices