Optoma X312 Manual
Optoma X312 Manual
 |
View all Optoma X312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma X312 manual content summary:
- Optoma X312 | Manual - Page 1
(RGB) .... 31 DISPLAY 32 DISPLAY | 3D 34 SETUP 35 SETUP | Security 37 SETUP | Audio Settings 39 SETUP | Advanced 40 OPTIONS 41 OPTIONS | Advanced 43 OPTIONS | Lamp Settings 44 OPTIONS | Optional Filter Settings.... 45 Appendices 46 Troubleshooting 46 Replacing the Lamp 52 Installing and - Optoma X312 | Manual - Page 2
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma X312 | Manual - Page 3
down. Follow instructions as described on pages 52-53. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ▀■ Warning- Reset the "Lamp Reset" function from the on-screen display "OPTIONS | Lamp Settings" menu after - Optoma X312 | Manual - Page 4
: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the slots - Optoma X312 | Manual - Page 5
to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features ™™ (*) For models with HDMI Input. ™™ Product features may vary depending on model. ▀■ SVGA (800x600) / XGA (1024x768) Native resolution ▀■ HD compatible - 720p and 1080p supported ▀■ BrilliantColorTM - Optoma X312 | Manual - Page 6
the box. If something is missing, please contact your nearest customer service center. Projector Power Cord VGA Cable(*) Due to different applications in each Country information please visit www. optomaeurope.com Documentation : User's Manual Warranty Card*2 Quick Start Card English 6 - Optoma X312 | Manual - Page 7
Introduction Product Overview Main Unit 10 12 14 3 5 6 9 8 The interface is subject to model's specifications. Do not block projector in/out air vents. 1. Focus Ring 2. Zoom Lever 3. IR Receiver 4. Control Panel 5. Input / Output Connections 6. KensingtonTM Lock Port 7. Ventilation ( - Optoma X312 | Manual - Page 8
Introduction Control Panel 12 34 11 5 10 98 1. Source 2. Keystone Correction 3. Enter 4. Re-Sync 5. Help 6. Four Directional Select Keys 7. Temp LED 8. Power 9. On/Standby LED 10. Lamp LED 11. Menu 6 7 English 8 - Optoma X312 | Manual - Page 9
to model's specifications. 4. 5. HDMI Connector (*) Security Lock Slot 6. Composite Video Input Connector 7. Audio Output Connector ( 3.5mm mini jack) (*) 8. Audio Input Connector (3.5mm mini jack) (*) 9. USB Service for firmware upgrade 10. Power Socket 9 English - Optoma X312 | Manual - Page 10
Introduction Remote Control TS The interface is subject to model's specifications. 1 2 3 4 5 6 7 8 9 10 ™™ Before using the remote control for the first time, remove the transparent insulation tape. See page 19 for battery installation. CR2302V5OL VGA Enter Menu Zoom 11 1. Source 2. Re- - Optoma X312 | Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook Monitor Output Audio Output 62 3 1 4 ʼnŅŎŊ Due to the difference in applications for ŖŔŃ each country, some regions may molex have different accessories. (*) - Optoma X312 | Manual - Page 12
Installation Connect to Video Sources Composite Video Output S-Video Output DVD Player, Set-top Box, HDTV receiver 1 2 3 4 ʼnŅŎŊ ŖŔŃ Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory The - Optoma X312 | Manual - Page 13
will turn red. 2. Turn on the lamp by pressing " " button either on the top of When Power mode the projector or on the remote. The ON/STANDBY output and The startup screen will display in approximately 10 seconds. Audio pass-through The first time you use the projector, you will be asked to - Optoma X312 | Manual - Page 14
Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the "LAMP" LED indicator is lit red and if "On/Standby" indicator nearest service center if the projector displays these symptoms. See pages 63-64 for more flashes amber. "TEMP - Optoma X312 | Manual - Page 15
Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter - Optoma X312 | Manual - Page 16
the image, rotate the focus ring until the image is clear. SVGA/XGA series: The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters). Zoom Lever Focus Ring Adjusting Projection Image Size SVGA/XGA series: Projection Image Size from 22.9" to 300.0" (0.58 to 7.62 meters - Optoma X312 | Manual - Page 17
Installation SVGA/XGA Diagonal length (inch) size of 4:3 Screen 30. 120.00 5.08 3.81 200.00 150.00 6.10 4.57 240.00 180.00 This table is for user's reference only. Projection Distance (D) (m) (feet) wide tele wide tele 1.19 1.31 3.90 4.30 1.58 1.75 5.20 5.73 2.38 2.62 7.80 - Optoma X312 | Manual - Page 18
13-14. RE-SYNC Automatically synchronize the projector to the input source. ENTER Confirm your item selection. SOURCE Press "SOURCE" to select an input signal. Menu Help Four Directional Select Keys Keystone / Lamp LED Press "Menu" to launch the on-screen display (OSD) menu. To exit OSD - Optoma X312 | Manual - Page 19
case clean and install new battery. `` Risk of an explosion if battery is replaced by an incorrect type. `` Dispose of used battery according to the instructions. 19 English - Optoma X312 | Manual - Page 20
certain model) Press "VGA" to choose VGA sources. Adjust image distortion caused by tilting the projector. Use this function to choose your desired aspect ratio. Press "Menu" to launch the on-screen display (OSD) menu. To exit OSD, press "Menu" again. Adjust to increase / decrease the volume - Optoma X312 | Manual - Page 21
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the control panel to open the Help Menu. 21 English - Optoma X312 | Manual - Page 22
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 46-51 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 22 - Optoma X312 | Manual - Page 23
User Controls 23 English - Optoma X312 | Manual - Page 24
will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or "Enter" key to enter sub - Optoma X312 | Manual - Page 25
DISPLAY Reset Format Edge Mask Zoom Image Shift V Keystone 3D SETUP Language Exit H V 3D Mode 3D->2D #5 3D Format #5 3D Sync. Invert Exit Projection / Native / AUTO 0~10 -5~25 (80%~200%) -100~100 -100~100 -40~40 Off / DLP-Link 3D / L / R AUTO / SBS / Top and Bottom / Frame Sequential On / Off - Optoma X312 | Manual - Page 26
Power Mode (Standby) Exit Lamp Hours Lamp Reminder Brightness Mode Lamp Reset Dynamic Dimming Exit display (OSD) menus vary according to the signal type selected and the projector model you are using. (#1) "Color" and "Tint" are only supported in Video mode. (#2) "Signal" is only supported - Optoma X312 | Manual - Page 27
User Controls IMAGE Display Mode There are many factory presets optimized for various types Standardised accurate color. Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). User: User's settings. 3D: Recommend setting for 3D - Optoma X312 | Manual - Page 28
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma X312 | Manual - Page 29
User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. Standard: for PC or computer source. BrilliantColor™ - Optoma X312 | Manual - Page 30
Input. Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255)(*), RGB(16-235)(*) or YUV. Reset Choose "Yes" to return the display parameters on all menus to the factory default settings. English 30 - Optoma X312 | Manual - Page 31
if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use - Optoma X312 | Manual - Page 32
Use this function to choose your desired aspect ratio. SVGA/XGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. Native: This format displays the original image without any scaling. AUTO: Automatically - Optoma X312 | Manual - Page 33
Aspect ratio (source detected) 4:3 16:9 Native Resize image (SVGA) Resize image (XGA) 800 x 600 center 1024 x 768 the to reduce the size of an image. Press the to magnify an image on the projection screen. Each I/O has different setting of Image Shift "Edge Mask". Press into the next - Optoma X312 | Manual - Page 34
for 3D viewing. See page 56 for supported 3D formats. 3D Mode O ff: Select "Off" to turn 3D settings off for 3D images. D LP Link: Select "DLP Link" to use optimized settings for DLP Link 3D images. 3D -> 2D 3 D: Display 3D signal. L (Left): Display the left frame of 3D content - Optoma X312 | Manual - Page 35
Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Front-Desktop This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed. Front-Ceiling When selected, the image will turn upside - Optoma X312 | Manual - Page 36
User Controls Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 57-61 for the complete list of RS232 commands. English 36 - Optoma X312 | Manual - Page 37
. Password default value is "1234" (first time). Security On: Choose "On" to use security verification when turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to set how long (Month/Day/Hour) the - Optoma X312 | Manual - Page 38
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. English 38 - Optoma X312 | Manual - Page 39
Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio inputs are on the back panel of the projector. Use this option to reassign any of the Audio Inputs to the current image source. Default: VGA1/VGA2. Audio1: Video/S-Video. 39 English - Optoma X312 | Manual - Page 40
to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Default: The default startup screen. Neutral: Logo is not displayed on startup screen. Closed Captioning Use this function to set the desired startup screen. If changes are - Optoma X312 | Manual - Page 41
key on top of the projector for 5 seconds. Input Source projector will not search for inputs that are not selected. Source Lock On: The projector will only search current input connection. Off: The projector will be locked however, the projector can be operated by the remote control. By selecting - Optoma X312 | Manual - Page 42
User Controls (*) The function depends on model's specifications. IR Function(*) O n: Choose "On", the projector can be operated by the remote control. When you change the setting from "Off" to "On", it will display a warning message: O ff: Choose "Off", you will only be able to use the - Optoma X312 | Manual - Page 43
Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer - Optoma X312 | Manual - Page 44
Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. When ambient temperature is over 40°C in operating, the projector - Optoma X312 | Manual - Page 45
default setting for Filter is "No". After assembling filter, please turn on the projector then press "Menu", go to "OPTIONS -> Optional Filter Settings -> Optional Filter Installed" and select "Yes". Filter Usage Hours Display the filter time. Filter Reminder Choose this function to show or hide the - Optoma X312 | Manual - Page 46
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma X312 | Manual - Page 47
all equipment including the projector. The screen of the Notebook or PowerBook computer is not displaying your presentation If their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is - Optoma X312 | Manual - Page 48
Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See pages 16-17. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to - Optoma X312 | Manual - Page 49
side-by-side. Image does not display in 3D Check if the Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp - Optoma X312 | Manual - Page 50
Standby State (Input power cord) Power on (Warming) ON/STANDBY LED (Blue/Red) Red Flashing Blue Lamp lighting Blue Power off (Cooling) Error (Over Temp.) Steady light No light Error (Fan fail) Error (Lamp fail) Flashing Blue Flashing Red Flashing Red Flashing Red Temp-LED (Red - Optoma X312 | Manual - Page 51
Messages Temperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±20° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any - Optoma X312 | Manual - Page 52
message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. English 52 Warning: If ceiling mounted, please use caution when opening - Optoma X312 | Manual - Page 53
. 4 8. Unscrew the one screw on the lamp module. 5 9. Lift up the lamp handle 6 and remove the lamp module slowly and carefully. 7 To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii - Optoma X312 | Manual - Page 54
and Cleaning the Dust Filter Installing the Dust Filter Procedure: Dust filters are 1. Install two filters. only required/sup- 2. Turn on the projector then press "Menu", go to "OPTIONS -> Op- plied in selected regions with ex- tional Filter Settings -> Optional Filter Installed" and select - Optoma X312 | Manual - Page 55
™™ (*2) 3D timing for True 3D projector. ™™ (*3) is not supported HDMI input signal for Mac. ™™ (*4) Proscene and Data Projector > 4,000 Lumens only, Native resolution must support. ™™ 120Hz input signals may be dependent on graphics cards support. NTSC PAL/SECAM VGA SVGA XGA WSVGA HDTV (720p) SXGA - Optoma X312 | Manual - Page 56
Appendices Signal Resolution Refresh Rate (Hz) Video Analog HDMI Mac 1920 x 1200 50 WUXGA (*1) 1920 x 1200 60 - O (*4) O (*4) - - O O O SDTV (576i) 720 x 576 50 O - O - SDTV (576p) 720 x 576 50 O - O - SDTV (480i) 720 x 480 60 O - O - SDTV (480p) 720 x 480 - Optoma X312 | Manual - Page 57
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 9876 54321 Pin no. 1 2 3 4 5 6 7 8 9 Spec. (from projector side) N/A RXD TXD N/A GND N/A N/A N/A N/A 57 English - Optoma X312 | Manual - Page 58
Projector Return (Pass): P Projector Return (Fail): F Projector Return (Fail): F XX=01Į99, projector's ID, XX=00 is for all projectors SEND to projector 33 0D VGA 2 Component ~XX20 1 7E 30 30 32 30 20 31 0D Display Mode Presentation ~XX20 2 7E 30 30 32 30 20 32 0D Bright ~XX20 - Optoma X312 | Manual - Page 59
1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link ~XX400 0 7E 30 30 34 30 30 20 30 0D ~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop ~XX71 2 7E 30 30 37 31 20 32 7E 39 39 39 39) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) ~XX80 1 7E 30 - Optoma X312 | Manual - Page 60
30 30 20 n 0D Display message on the OSD Enter (for projection MENU) ~XX140 projector automatically 232 ASCII Code HEX Code Function Projector Return Description System status INFOn n : 0/1/2/3/4/6/7/8 = Standby/Warming/Cooling/Out of Range/ Lamp fail/Fan Lock/Over Temperature/Lamp - Optoma X312 | Manual - Page 61
30 31 35 31 20 31 0D Model name OKn n:1/2= SVGA/ XGA/ ~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp Hours OKbbbb bbbb: LampHour ~XX108 2 7E 30 30 31 30 38 20 31 0D Cumulative Lamp Hours OKbbbbb bbbbb: (5 digits) Total Lamp Hours ~XX321 1 7E 30 30 33 32 31 20 - Optoma X312 | Manual - Page 62
Appendices Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Minimum - Optoma X312 | Manual - Page 63
Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Latin America 3178 Laurelview Ct. Fremont - Optoma X312 | Manual - Page 64
Taiwan 12F., No.213, Sec. 3, Beixin Rd., +886-2-8911-8600 Xindian Dist., New Taipei City 231, +886-2-8911-6550 Taiwan, R.O.C. [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong +852-2396-8968 - Optoma X312 | Manual - Page 65
& Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Optoma X312 | Manual - Page 66
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Connect to Computer/Notebook
........
11
Connect to Video Sources
.................
12
Powering the Projector On / Off
........
13
Powering On the Projector
.................
13
Powering off the projector
..................
14
Warning Indicator
...............................
14
Adjusting the Projected Image
..........
15
Adjusting the Projector’s Height
........
15
Adjusting the Projector’s Zoom /
Focus
.................................................
16
Adjusting Projection Image Size
........
16
User Controls
................................
18
Control Panel & Remote Control
......
18
Control Panel
.....................................
18
Remote Control Battery Installation ... 19
Remote Control
..................................
20
On-screen Display Menus
................
24
How to operate
..................................
24
Menu Tree
..........................................
25
IMAGE
...............................................
27
IMAGE | Advanced
............................
29
IMAGE | Advanced | Signal (RGB) ... 31
DISPLAY
............................................
32
DISPLAY | 3D
...................................
34
SETUP
...............................................
35
SETUP | Security
...............................
37
SETUP | Audio Settings
.....................
39
SETUP | Advanced
............................
40
OPTIONS
...........................................
41
OPTIONS | Advanced
........................
43
OPTIONS | Lamp Settings
.................
44
OPTIONS | Optional Filter Settings ... 45
Appendices
....................................
46
Troubleshooting
................................
46
Replacing the Lamp
..........................
52
Installing and Cleaning the Dust
Filter
..................................................
54
Compatibility Modes
.........................
55
Computer/Video/HDMI/Mac
Compatibility
......................................
55
3D Input Video Compatibility
.............
56
RS232 Commands and Protocol
Function List
.....................................
57
RS232 Pin Assignments
....................
57
RS232 Protocol Function List
............
58
Ceiling Mount Installation
..................
62
Optoma Global Offices
.....................
63
Regulation & Safety Notices
.............
65
Table of Contents