Optoma X400 W400 plus_UserManual

Optoma X400 Manual

Get Optoma X400 PDF manuals and user guides View all Optoma X400 manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma X400 manual content summary:

  • Optoma X400 | W400 plus_UserManual - Page 1
    DLP® Projector User manual
  • Optoma X400 | W400 plus_UserManual - Page 2
    Table of Contents SAFETY 4 Important Safety Instruction...4 3D Safety Information...5 Copyright...6 Disclaimer...6 Trademark AND INSTALLATION 15 Installing the projector...15 Adjusting the projector image...19 USING THE PROJECTOR 22 Powering on / off the projector 22 Selecting an input source...
  • Optoma X400 | W400 plus_UserManual - Page 3
    settings menu 51 Setup test pattern menu...52 Setup remote settings menu...52 Setup projector ID menu...52 Projector dimensions and ceiling mount installation 72 IR remote control 1 codes...73 IR remote control 2 codes...75 Troubleshooting...77 Warning indicators...78 Specifications...81 Optoma
  • Optoma X400 | W400 plus_UserManual - Page 4
    servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction fire and/or electric shock, do not expose the projector to rain or moisture. Do not install near heat
  • Optoma X400 | W400 plus_UserManual - Page 5
    service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. ‡‡ See projector the unit to cool down. Follow instructions as described on pages 62-63. ‡‡ This projector will detect the life of the
  • Optoma X400 | W400 plus_UserManual - Page 6
    may cause disorientation for some viewers. Accordingly, DO NOT place your 3D PROJECTOR near open stairwells, cables, balconies, or other objects that can be tripped of Texas Instruments. All other product names used in this manual are the properties of their respective owners and are Acknowledged.
  • Optoma X400 | W400 plus_UserManual - Page 7
    has been tested and found granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding
  • Optoma X400 | W400 plus_UserManual - Page 8
    supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories  CD User Manual *(1)  Warranty Card *(2)  Basic User Manual Projector Remote control *(3) Power lead Documentation Note The remote control is shipped with the battery. *(1) For
  • Optoma X400 | W400 plus_UserManual - Page 9
    INTRODUCTION Product Overview 12 3 45 6 8 7 9 10 13 12 11 Note: Keep a minimum distance of 20 cm between the "inlet" and "outlet" labels. No Item 1. Lamp Cover 2. Focus Ring 3. Zoom Lever 4. IR Receiver 5. Keypad 6. Tilt-Adjustment Foot 7. Security Bar No Item 8. Lens 9.
  • Optoma X400 | W400 plus_UserManual - Page 10
    RS-232C VIDEO Audio In Audio Out Type 2 (13 IO) 14 12 11 1 23 4a 5 6 8 7b HDMI 1 / MHL HDMI 2 USB Power Out (5V 1.0A) MOUSE / SERVICE VGA-IN 1 / YPbPr VGA-OUT / YPbPr VGA-IN 2 / YPbPr RS-232C S-VIDEO VIDEO Audio Out Audio In 1 RJ-45 Audio In 2 /Mic In 14 13a
  • Optoma X400 | W400 plus_UserManual - Page 11
    14. Power Socket Type 1 (9 IO √ N/A √ √ √ N/A N/A √ √ √ √ Note: "√" means the item is supported, "N/A" means the item is not available. Note: ‡‡ ‡‡ Remote mouse requires special remote control. *This model supports mouse / service capability. Type 2 (13 IO √ (x2) √ √ √ √ √ English 11
  • Optoma X400 | W400 plus_UserManual - Page 12
    INTRODUCTION Keypad 1 23 4 11 5 10 6 9 8 7 No Item 1. On/Standby LED 2. Lamp LED 3. Keystone Correction 4. Temp LED 5. Information 6. Re-Sync No Item 7. Enter 8. Menu 9. Four Directional Select Keys 10. Source 11. Power 12 English
  • Optoma X400 | W400 plus_UserManual - Page 13
    18. Brightness Mode The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 20 for battery installation. CR2302V5OL
  • Optoma X400 | W400 plus_UserManual - Page 14
    . Numeric Keypad (0-9) 27. Resync The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features.
  • Optoma X400 | W400 plus_UserManual - Page 15
    mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact Optoma. English 15
  • Optoma X400 | W400 plus_UserManual - Page 16
    SETUP AND INSTALLATION Type 1 (9 IO) 3 13 7 12 6 HDMI 1 / MHL HDMI 2 USB Power Out (5V 1.0A) MOUSE / SERVICE VGA-IN / YPbPr VGA-OUT RS-232C VIDEO Audio In Audio Out 15 MOLEX 4 11 9 14 16 12 MOLEX 16 English
  • Optoma X400 | W400 plus_UserManual - Page 17
    SETUP AND INSTALLATION Type 2 (13 IO) 3 4 7 12 5 6 HDMI 1 / MHL HDMI 2 USB Power Out (5V 1.0A) MOUSE / SERVICE VGA-IN 1 / YPbPr VGA-OUT / YPbPr VGA-IN 2 / YPbPr RS-232C S-VIDEO VIDEO Audio Out Audio In 1 RJ-45 Audio In 2 /Mic In MOLEX 15
  • Optoma X400 | W400 plus_UserManual - Page 18
    Cable √ 12. USB Cable (mouse control) √ 13. VGA Out Cable √ 14. USB Power Cable √ 15. HDMI Stick √ 16. Power Cord √ Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (13 IO 18 English
  • Optoma X400 | W400 plus_UserManual - Page 19
    adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Zoom and focus ‡‡ To adjust the image size, turn the
  • Optoma X400 | W400 plus_UserManual - Page 20
    case clean and install new battery. ‡‡ Risk of an explosion if battery is replaced by an incorrect type. ‡‡ Dispose of used battery according to the instructions. 20 English
  • Optoma X400 | W400 plus_UserManual - Page 21
    should not be longer than 8 meters (~ 26 feet). ‡‡ Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. ‡‡ Make sure the IR transmitter of the remote control is not being shined by sunlight or fluorescent lamps
  • Optoma X400 | W400 plus_UserManual - Page 22
    again. 3. Press the " " again to confirm, otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the projector will shut down. 4. The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/ Standby LED will flash
  • Optoma X400 | W400 plus_UserManual - Page 23
    source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on the projector keypad or the remote control to select the desired input. or English 23
  • Optoma X400 | W400 plus_UserManual - Page 24
    settings. The projector will automatically detect the source. 1. To open the OSD menu, press on the remote control or the projector keyboard. 2. exit, press the or again. The OSD menu will close and the projector will automatically save the new settings. Sub Menu Settings Display Main Menu
  • Optoma X400 | W400 plus_UserManual - Page 25
    USING THE PROJECTOR OSD Menu tree (Type 1) Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Display Mode [Data] Wall Color Display Brightness Contrast Sharpness Color Tint
  • Optoma X400 | W400 plus_UserManual - Page 26
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Color Matching RGB Gain/Bias Reset Exit Red Gain Green Gain Blue Gain Red Bias
  • Optoma X400 | W400 plus_UserManual - Page 27
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu 3 3D->2D 3D 3D Format Display 3D sync invert Aspect Ratio Audio Edge Mask Zoom Image shift Keystone Mute Volume H: -50~50 V: -50~50 Projection Setup Screen Type [WXGA/WUXGA models] Lamp Settings Lamp Reminder Lamp
  • Optoma X400 | W400 plus_UserManual - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Optional Filter Installed Filter Security Security Timer Change Password HDMI Link Month Day Hour Inclusive of TV Power On Link Power Off Link Test Pattern 28 English Sub Menu 4 Values Yes No (Read only) Off 300hr 500hr [Default] 800hr
  • Optoma X400 | W400 plus_UserManual - Page 29
    USING THE PROJECTOR Main Menu Sub Menu Test Pattern Sub Menu 2 Sub Menu 3 IR Function User1 Setup Remote Settings [depends on remote] User2 User3 Sub Menu 4 Values White Grid White Off On Off HDMI 2 Test Pattern Brightness Contrast Sleep Timer [Default] Color Matching Color Temp Gamma
  • Optoma X400 | W400 plus_UserManual - Page 30
    Main Menu Sub Menu Projector ID Sub Menu 2 Sub Menu 3 Language Setup Options 30 English Closed Captioning Menu Settings Menu Location Menu Timer Auto Source Sub Menu 4 Values 0~99 English [
  • Optoma X400 | W400 plus_UserManual - Page 31
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Input Source Setup Options HDMI1/MHL Input Name HDMI2 VGA Video High Altitude Display Mode Lock Keypad
  • Optoma X400 | W400 plus_UserManual - Page 32
    Rate Display Mode Power mode (Standby) Information Lamp Hours Projector ID Filter Usage Hours Brightness Mode FW Version Sub Menu will only reset both Lamp Hours in OSD and Lamp Hours in service mode. The Projection Hours in service mode will not be reset. Each display mode can be adjusted and
  • Optoma X400 | W400 plus_UserManual - Page 33
    USING THE PROJECTOR OSD Menu tree (Type 2) Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Display Mode [Data] Wall Color Display Brightness Contrast Sharpness Color Tint
  • Optoma X400 | W400 plus_UserManual - Page 34
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Color Matching RGB Gain/Bias Reset Exit Red Gain Green Gain Blue Gain Red Bias
  • Optoma X400 | W400 plus_UserManual - Page 35
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu ] IR 3D [Default] L R Auto [Default] SBS Top and Bottom Frame Sequential On Off [Default] 4:3 16:9 16:10 [WXGA WUXGA models] LBX [except SVGA XGA models] Native Auto 0~10 [Default: 0] -5~25 [Default: 0] [Default:0] -40~40 Off
  • Optoma X400 | W400 plus_UserManual - Page 36
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Projection Screen Type [WXGA/WUXGA models] Lamp Settings Lamp Reminder Lamp Reset Optional Filter Installed Filter Usage Hours Filter Settings Filter Reminder Setup Filter Reset Direct Power On Signal
  • Optoma X400 | W400 plus_UserManual - Page 37
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Security Security Security Timer Change Password Month Day Hour HDMI Link HDMI Link Settings Inclusive of TV Power On Link Power Off Link Test Pattern Setup IR Function Remote Settings [depends on remote] User1 User2 Sub
  • Optoma X400 | W400 plus_UserManual - Page 38
    Sub Menu 3 User2 Remote Settings [depends on remote] User3 Setup Projector ID Options Language Sub Menu 4 Values Color Matching [Default] Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL HDMI 2 VGA 2 Test Pattern LAN Brightness Contrast Sleep Timer Color Matching Color Temp [Default
  • Optoma X400 | W400 plus_UserManual - Page 39
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Language Closed Captioning Menu Settings Menu Location Setup Options Menu Timer Auto Source Input Source HDMI1/MHL
  • Optoma X400 | W400 plus_UserManual - Page 40
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Keypad Lock Sub Menu 3 Information Hide Options Logo Setup Background Color Reset LAN Network Control Reset OSD Reset to
  • Optoma X400 | W400 plus_UserManual - Page 41
    Power mode (Standby) Lamp Hours Information Network Status IP Address Projector ID Filter Usage Hours Brightness Mode FW Version Sub Menu will only reset both Lamp Hours in OSD and Lamp Hours in service mode. The Projection Hours in service mode will not be reset. Each display mode can be adjusted
  • Optoma X400 | W400 plus_UserManual - Page 42
    There are many factory presets optimized for various types of images. ‡‡ Presentation: This mode is suitable for showing PowerPoint presentations when the projector is connected to the PC. ‡‡ Bright: Maximum brightness from PC input. ‡‡ Cinema: Select this mode for home theater. ‡‡ Game: Select this
  • Optoma X400 | W400 plus_UserManual - Page 43
    sources. Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. ‡‡ Bright: Choose "Bright" to increase the brightness. ‡‡ Eco.: Choose "Eco." to dim the projector lamp which will lower power consumption and extend the lamp life. ‡‡ Dynamic: Choose "Dynamic
  • Optoma X400 | W400 plus_UserManual - Page 44
    USING THE PROJECTOR ‡‡ Reset Eco+: When Eco+ mode is activated, the brightness :9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. ‡‡ 16:10 (WXGA WUXGA models only): This format is for 16:10 input sources, like widescreen laptops. ‡‡ LBX (except SVGA XGA model
  • Optoma X400 | W400 plus_UserManual - Page 45
    watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In aspect ratio to 2.0:1. b) Select "Superwide" format. c) Align the projector image correctly on the screen. XGA scaling table: Source 4x3 16x9
  • Optoma X400 | W400 plus_UserManual - Page 46
    USING THE PROJECTOR WXGA scaling table (screen type 16:10): Note: ‡‡ Supported screen type 16:9 (1280x720), 16:10 (1280x800 1280x768. -If source is 16:10, the screen type will be scaled to 1280x800. WXGA auto mapping rule (screen type 16:10): Auto 4:3 Wide Laptop SDTV HDTV Input resolution
  • Optoma X400 | W400 plus_UserManual - Page 47
    USING THE PROJECTOR WXGA scaling table (screen type 16:9): 16 : 9 screen 4x3 16x9 LBX be scaled to 1200x720. -If source is 16:10, the screen type will be scaled to 1152x720. WXGA auto mapping rule (screen type 16:9): Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution
  • Optoma X400 | W400 plus_UserManual - Page 48
    USING THE PROJECTOR 1080P auto mapping rule: Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution 640 480 800 600 image position horizontally (H) or vertically (V). Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. 48 English
  • Optoma X400 | W400 plus_UserManual - Page 49
    USING THE PROJECTOR Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound projection between front, rear, ceiling-top, and rear-top. Setup screen type menu Screen Type (for WXGA/WUXGA models only) Choose the screen type from 16:9 and 16:10. Setup lamp settings menu Lamp
  • Optoma X400 | W400 plus_UserManual - Page 50
    Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Configure the sleep timer. ‡‡ Sleep Timer (min): Sets
  • Optoma X400 | W400 plus_UserManual - Page 51
    in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Apmlifier HDMI DVD Player ". Inclusive of TV Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both devices
  • Optoma X400 | W400 plus_UserManual - Page 52
    CEC device is turned on. Power Off Link Enable this function to let both HDMI Link and projector to be automatically turned off at the same time. Setup test pattern menu Test Pattern Select the test pattern from green grid, magenta grid, white grid, white or disable this function (off). Setup remote
  • Optoma X400 | W400 plus_UserManual - Page 53
    "Off" to lock or unlock adjusting display mode settings. Keypad Lock When the keypad lock function is "On", the Keypad will be locked. However, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the Keypad. Information Hide Enable this function to hide
  • Optoma X400 | W400 plus_UserManual - Page 54
    ). DHCP Use this option to enable or disable the DHCP function. ‡‡ On: Projector will obtain an IP address automatically from your network. ‡‡ Off: To assign IP, subnet mask, gateway, and DNS configuration manually. Note: Exiting OSD will automatically apply the entered values. IP Address Display
  • Optoma X400 | W400 plus_UserManual - Page 55
    > LAN"). 3. Open Network and Sharing Center page on your PC, and assign the identical network parameters to your PC as set on projector. Click "OK" to save the parameters. 4. Reset Open the web browser on your PC and type in to the URL field the IP address, assigned
  • Optoma X400 | W400 plus_UserManual - Page 56
    /english/ For more detailed information about the various types of external devices which can be connected to the LAN / RJ45 port and remote control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. 56 English
  • Optoma X400 | W400 plus_UserManual - Page 57
    RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). HDMI 1 / MHL HDMI 2 USB Power Out (5V 1.0A) MOUSE / SERVICE VGA-IN 1 / YPbPr VGA-OUT / YPbPr VGA-IN 2 / YPbPr RS-232C S-VIDEO VIDEO Audio Out Audio In 1 RJ-45 Audio In 2 /Mic In 2. On the
  • Optoma X400 | W400 plus_UserManual - Page 58
    5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector. 8. Open on projector Network > LAN. 9. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255.0 ±± Gateway
  • Optoma X400 | W400 plus_UserManual - Page 59
    USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page Tool page Contact IT helpdesk English 59
  • Optoma X400 | W400 plus_UserManual - Page 60
    projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the projector port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows "TELNET.exe" (console mode
  • Optoma X400 | W400 plus_UserManual - Page 61
    Source ‡‡ Resolution ‡‡ Refresh Rate ‡‡ Display Mode ‡‡ Power mode(standby) ‡‡ Lamp Hours ‡‡ Projector ID ‡‡ Filter Usage Hours ‡‡ Brightness Mode ‡‡ FW Version Info menu (Type 2) View the projector information as listed below: ‡‡ Regulatory ‡‡ Serial Number ‡‡ Source ‡‡ Resolution ‡‡ Refresh Rate
  • Optoma X400 | W400 plus_UserManual - Page 62
    screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: If ceiling mounted, please
  • Optoma X400 | W400 plus_UserManual - Page 63
    Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: (i) Press "Menu"  (ii) Select "Setup"  (iii) Select "Lamp Settings"  (iv) Select "Lamp Reset"  (v) Select
  • Optoma X400 | W400 plus_UserManual - Page 64
    the dust filter every three months. Clean it more often if the projector is used in a dusty environment. Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3. Remove the dust filter carefully
  • Optoma X400 | W400 plus_UserManual - Page 65
    SVGA: 800x600 @ 120Hz 1024x768 @ 120Hz 1280x800 @ 60Hz 1280x1024 @ 60Hz 1680x1050 @ 60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz XGA/WXGA: 1440x900 @ 60Hz 1024x768 @ 120Hz 1280x800 @ 60Hz 1280x1024 @ 60Hz 1680x1050 @ 60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz 1080P: 1280x720
  • Optoma X400 | W400 plus_UserManual - Page 66
    SVGA: 800x600 @ 120Hz 1024x768 @ 120Hz 1280x800 @ 60Hz 1280x1024 @ 60Hz 1680x1050 @ 60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz XGA/WXGA: 1440x900 @ 60Hz 1024x768 @ 120Hz 1280x800 @ 60Hz 1280x1024 @ 60Hz 1680x1050 @ 60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz 1080P: 1280x720
  • Optoma X400 | W400 plus_UserManual - Page 67
    is Frame sequential Note: ‡‡ ‡‡ ‡‡ If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode. Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in 100 hz; other 3D timing will run in 120hz. 1080p@24hz will
  • Optoma X400 | W400 plus_UserManual - Page 68
    .65 7.1 7.9 23.29 25.92 7.9 8.8 25.92 28.87 9.9 11.0 32.48 36.09 11.8 13.2 38.71 43.31 Note: Zoom ratio is 1.1x. WXGA Diagonal Length Size of (16:9) Screen 36 40 50 60 70 80 90 100 120 150 180 200 250 300 Screen Size W x H (m) (inch) Width Height
  • Optoma X400 | W400 plus_UserManual - Page 69
    ADDITIONAL INFORMATION 1080P Diagonal Length Size of (16:9) Screen 36 40 50 60 70 80 90 100 120 150 180 200 250 300 Screen Size W x H (m) (inch) Width Height Width Height 0.80 0.45 31.38 17.65 0.89 0.5 34.86 19.6 1.11 0.62 43.58 24.5 1.33 0.75 52.29 29.4 1.55 0.87 61.01 34.3
  • Optoma X400 | W400 plus_UserManual - Page 70
    ADDITIONAL INFORMATION WXGA Diagonal Length Size of (16:9) Screen 36 40 50 60 70 80 90 100 120 150 180 200 250 300 Screen Size W x H (m) (inch) Width Height
  • Optoma X400 | W400 plus_UserManual - Page 71
    ADDITIONAL INFORMATION W H H Hd 5.2 cm D English 71
  • Optoma X400 | W400 plus_UserManual - Page 72
    and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡‡ Screw type: M4*3 ‡‡ Minimum screw
  • Optoma X400 | W400 plus_UserManual - Page 73
    USB mouse via USB) C9 Press to display or exit the on-screen display menus for projector. 88 ‡‡ Press to adjust image distortion caused by tilting the projector. C7 ‡‡ Press to navigate down. Press to manually select a 3D mode that matches your 3D content. 93 Press to choose HDMI source. 86
  • Optoma X400 | W400 plus_UserManual - Page 74
    choose video source. Press to select an input signal. Press to automatically adjust the picture brightness to give an optimum contrast performance. Automatically synchronize the projector to the input source. Key code 8E CE C3 87 C4 74 English
  • Optoma X400 | W400 plus_UserManual - Page 75
    -key definition Description Power on/off Press to turn on / off the projector. Switch Press to switch the USB mouse on / off. Freeze Press to / unhide the screen picture and turn off / on audio. Press to freeze the projector image. Press to momentarily turn off / on the audio. L R Up arrow
  • Optoma X400 | W400 plus_UserManual - Page 76
    a displayed image. ‡‡ Use as numeric keypad number "1". ‡‡ Press to display or exit the on-screen display menus for projector. ‡‡ Use as numeric keypad number "2". ‡‡ Press to manually select a 3D mode that matches your 3D content. ‡‡ Use as numeric keypad number "3". ‡‡ Press to choose HDMI source
  • Optoma X400 | W400 plus_UserManual - Page 77
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma X400 | W400 plus_UserManual - Page 78
    problems T he projector stops responding to all controls ‡‡ If possible, turn off the projector this happens, the projector will not turn on 63. Remote control problems If the remote , the projector will automatically This indicates the projector has overheated. projector, wait for 30
  • Optoma X400 | W400 plus_UserManual - Page 79
    ADDITIONAL INFORMATION LED lightning messages Message Standby state (Input power cord) Standby state (Burn in mode) Power on (Warming) Burn in (Warming) Power on (Burn in mode) Power on and Lamp lighting Power off (Cooling) Burn in (Cooling) Quick Resume (100 secs) Error (Over temp.) Error (Fan
  • Optoma X400 | W400 plus_UserManual - Page 80
    the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out
  • Optoma X400 | W400 plus_UserManual - Page 81
    USING THE PROJECTOR Specifications Optical Native resolution Lens Image size (diagonal) Projection distance Description XGA/ WXGA/ 1080P Manual zoom and manual focus 22.9"~252" (overdrive to 300") 1m ~ 10m (focus range) (overdrive to 12m) Electrical Color reproduction Scan rate Built-in speaker
  • Optoma X400 | W400 plus_UserManual - Page 82
    USING THE PROJECTOR Optoma global offices For service or support, please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com Canada
  • Optoma X400 | W400 plus_UserManual - Page 83
    www.optoma.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
User manual
DLP
®
Projector