Oreck Air 5 Owners Guide - Page 16
General Parts Replacement
View all Oreck Air 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
General Parts Replacement Motor Removal and Replacement 1. Remove the cabinet top by pressing down the thumb latch and sliding the top forward. 2. Remove the cell assembly (see inside of top for instructions). 3. Remove the stripper by pulling it to the right and applying pressure to the bearing wall. Lift the left hand side of the stripper out of the bearing wall locator seat and then remove the stripper. 4. Flip the unit onto its side with the bearing wall up and release the two locking tabs for the bearing wall assembly by using a regular screwdriver from the bottom. Place screwdriver blade into the slot on top of the snap finger locking tab and twist the blade slightly while pulling on the bearing plate. Repeat for the second tab. The bearing wall may now be removed by moving the blower wheel and bearing wall away from the cabinet and lifting the bearing wall off of the blower wheel. 16