Oreck Graphite User Guide
Oreck Graphite Manual
 |
View all Oreck Graphite manuals
Add to My Manuals
Save this manual to your list of manuals |
Oreck Graphite manual content summary:
- Oreck Graphite | User Guide - Page 1
Graphite™ User's Guide U4305H2BS Important! Read all instructions carefully, and keep for future reference. - Oreck Graphite | User Guide - Page 2
described in this manual. Use only to an Oreck Approved Service Centre or INSTRUCTIONS Household Use Only Enjoy Thank you for purchasing the Oreck U4305H2BS Graphite series upright vacuum cleaner. The U4305H2BS Graphite features a 6-year limited warranty and the HEPA Filtration Odour Fighting Bag - Oreck Graphite | User Guide - Page 3
6 Replacing Worn Belt 6 Adjusting or Replacing Brushroll 7 Replacing Edge Brush 7 Stuffing or Blockage 8 Troubleshooting 8 Parts 9 Accessories & Replacement Parts 9 Warranty 9 Operation To assist you in identifying your vacuum's components, the parts have been numbered as follows. Parts - Oreck Graphite | User Guide - Page 4
on the left side of the Conector Deflector Assembly (10 on parts list). Connector 1 Assembly 2.1 3 Operating the Vacuum Make sure the HEPA Filtration Odour Fighting Bag is in place. DO NOT operate the cleaner without a dust bag. Plug the power cord into an electrical outlet and press the - Oreck Graphite | User Guide - Page 5
Belt The belt on your vacuum cleaner controls the speed of the revolving brush and is very important for the effective operation of the cleaner. If the belt becomes stretched or cut, it will cause the revolving brush to stop completely or slow down. See instructions in the manual for replacing belt - Oreck Graphite | User Guide - Page 6
the upright and locked bag, vacuum it or shake it out. A little preventative maintenance will keep your cleaner looking new and will ensure continued cleaning effectiveness. Maintenance Replacing Worn Belt WARNING: Unplug cord from electrical outlet before servicing. 11 Remove the replacement belt - Oreck Graphite | User Guide - Page 7
assembly settings arethe same and face up when replacing the brushroll. 15 Reassemble the belt. 16 Reassemble the baseplate. If a previous the unit. 16 OLD NEW 17 18 19 Replacing Edge Brush WARNING: Unplug cord from electrical outlet before servicing. Turn the power head over. With baseplate - Oreck Graphite | User Guide - Page 8
23 24 25 26 27 28 Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck Approved Service Centre. Problem Check What to do Cleaner will not run. • Not - Oreck Graphite | User Guide - Page 9
Replacement Parts Item Part Number 8 Pack, HEPA Filtration Odour Fighting Bags 8 Pack, Green Hypo-allergenic Self Sealing Bags Belts, 3 Pack CCPK8OH PK20008DW 3BELTS Customer Care 0845 603 0153 website: www.oreck.co.uk Warranty Total Cleaning System ORECK MANUFACTURING COMPANY: (Oreck - Oreck Graphite | User Guide - Page 10
©2011 Oreck Holdings, LLC. All rights reserved. All word marks, logos product configurations and registered trademarks are owned and used under the authority of Oreck Holdings, LLC. 76140-01 REV A 06/15 ECN # R-10492 UK Edition
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
User’s
Guide
Important!
Read all instructions carefully, and keep for future reference.
Graphite
™
U4305H2BS