Oregon Scientific BPW810 User Manual - Page 15

EN Problem Symptom Check This Error message Err shows on the display. A measure- ment error occurred Err 1, 2, or 3 shows on the display The wrist cuff is not secure Err 4 shows on the display The monitor detected motion while measuring Err 5 shows on the display Err 6 shows on the display Pressure is over 37.3 kPa (280 mmHg) Deflation period was too long Remedy Relax for a moment and then measure again Refasten the cuff and then measure again Movement can affect the measurement. Relax for a moment and then measure again Relax for a moment and then measure again Movement can affect the measurement. Relax for a moment and then measure again Problem Symptom Check This Remedy Error message Err 7 or 8 shows on the display A calibration error occurred Retake the measurement. If the problem persists, contact the retailer or our customer service department for further assistance. Refer to the warranty for contact information and return instructions Settings are wrong Date and time are incorrect Measurement unit (kPa or mmHg) are incorrect The clock Reset the clock was not set or reset after installing new batteries The Reset the measurement measurement unit was not unit set or reset after installing new batteries 14