Oregon Scientific GP123 User Manual - Page 5
To Set Clock And Alarm, Altimeter And Barometer Modes, About The Altimeter - Barometer, To Set
View all Oregon Scientific GP123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
EN To disable alarm: Press any key. ALTIMETER AND BAROMETER MODES ABOUT THE ALTIMETER - BAROMETER TO SET CLOCK AND ALARM 1. Press and hold DISP/- to enter time setting mode. 2. Set clock and alarm by pressing the following buttons: • to increase value or toggle options The altimeter measures altitude in either meters or feet. The device is equipped with an intelligent barometer that determines altitude by the built-in sensor and advanced Baro-compensation technology. It also distinguishes the differences between pressure caused by the changes in physical altitudes and pressure caused by weather conditions. This eliminates discrepancies and makes the altimeter more accurate than most of the average devices available on the market. Maximum altitude and instant sea level pressure readings are also provided. • DISP/- to decrease value or toggle options • SET to confirm TO SET AND RESET ALTIMETER The setting options are: hour format, hour, minute, year, calendar format, month, date, alarm time (hour / minute), alarm on/off, measurement unit. The altitude is automatically measured from the moment you switch on the device. It will provide both barometer readings and maximum sea level pressure readings. NOTE For your convenience, measurement units have been programmed to automatically follow the same format (imperial / metric). To set and reset altimeter: 1. Press DISP/- repeatedly to navigate to altimeter mode. 2. Press and hold SET to enter settings. will appear when alarm has been enabled. 3. Press or DISP/- to change current altitude, then SET to confirm. 4. Press 5 or DISP/- to select whether to clear