Panasonic AG HVX200 P2 Camcoder - Page 49
Interval recording (INTERVAL REC), Set the time INTERVAL TIME.
View all Panasonic AG HVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
1 Check that the settings given on the previous page have been established for the OPERATION TYPE item and recording format. 2 Select ON under PREREC MODE. (Page 107) • For menu operations (Page 97) 3 Press the START/STOP button. Pre-recording starts. • In the following cases, the pre-recording function will be canceled, and recording will be initiated from the respective operation points. · When IEEE1394 input recording is initiated · When the unit is transferred from the playback mode to the recording mode · When interval recording is initiated · When one-shot recording is initiated · When loop recording is initiated • Immediately after switching from the MCR mode to CAMERA mode, immediately after turning on the camera-recorder's power or immediately after changing the PRE-REC option setting, it may not be possible to record the images and sound before the time mentioned on the previous page has elapsed even if the recording has been started straight away. P2 Interval recording (INTERVAL REC) With this function, the unit continuously records frames (1/30 sec.) one at a time with an interval. The interval can be set with INTERVAL TIME item. One-frame recording One-frame recording One-frame recording (Time) Time set as Time set as INTERVAL TIME INTERVAL TIME 1 Check that the settings given on the previous page have been established for the OPERATION TYPE item and recording Shooting format. 2 Select INTERVAL under REC FUNCTION. (Page 107) • For menu operations (Page 97) 3 Set the time INTERVAL TIME. (Page 107) 4 Press the START/STOP button. The unit starts INTERVAL REC operation. To stop operation, press the among the operation buttons. To release the function, either turn off the unit's power or select NORMAL under REC FUNCTION. • The following displays will appear on the left of the operation status display. While recording is underway: I-REC lights up. In temporary standby: I-PAUSE lights up. While recording is stopped: The "I-" of IPAUSE flashes. However, if the duration selected in step 3 is less than 2 seconds, I-REC will flash while recording is underway in accordance with the set time. • The pre-recording function does not work. • No sound is recorded. • All data recorded while this mode is active will be contained in one file. • No guarantees are made for the 1394 output images. • Operation is not possible even if only one of the inserted cards is DIR ENTRY NG CARD. (Page 94) • After interval recording has started, a recordable P2 card cannot be used even if it is inserted into an empty slot. • The slots for recording in this mode are indicated by the orange P2 card access lamps. The slots for recording P2 cards that are inserted later are indicated by the green P2 card access lamps. 49