Panasonic AG-HVX200APJ User Manual - Page 28
Remove the P2 card, When a card is ejected during formatting
View all Panasonic AG-HVX200APJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Basic shooting operations (P2 card) (continued) P2 Remove the P2 card 1 Lift up the viewfinder and open the card slot cover. • Check that the P2 card access lamp is not blinking orange. 2 Press the card eject button once, and when the button has popped back up, press it again. 3 Remove the P2 card. 1 Card eject button 2 3 • Do not eject the P2 card or turn the power off under the following circumstances, since doing so may cause a malfunction in the card: 1) While the orange P2 card access lamp is blinking after the card is inserted (and until it stops blinking). 2) During recording, during the recording finish process, or while the access lamp is blinking. • If a P2 card is ejected during formatting or while its data is being accessed, "TURN POWER OFF" appears in the viewfinder, and a warning is indicated by an alarm or tally lamp. If this happens, turn the power off and back on again. When a card is ejected during formatting: Format the card again. When a card is ejected while its data is being accessed: The clips may be thrown out of order. Check the clips and repair them. (For details on repairing clips, see page 70.) • During recording, a P2 card inserted into an empty slot will not be immediately recognized at the following times. 1) Immediately after pre-recording 2) Before and after performing continuous recording (loop recording, hot swap recording, etc.) spanning two slots • During playback, a P2 card inserted into the empty slot will not be recognized and the P2 card access lamp will not light. When playback is completed, the P2 card recognition will begin. • You can use ACCESS LED on the OTHER FUNCTIONS screen to set the P2 card access lamps so that they will always be off. In this case, either turn off the power or wait until enough time has passed after inserting the cards or stopping operation before ejecting the cards. • If a P2 card is ejected while thumbnails are displayed, the thumbnail screen is released. Cautions in using P2 cards Before using a P2 card, be sure to format it with a P2 device. 28