Panasonic AGVP300 AGVP300 User Guide - Page 55
BEFORE REQUESTING SERVICE, Helpful Hints
View all Panasonic AGVP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Before Requesting Service Before requesting service, check the following points once again. General No power. ≥Insert the AC power supply cord and system cable securely. 12 No response when buttons pressed. ≥Some operations may be prohibited by the disc. - ≥The unit may not be operating properly due to lightning, static electricity or some other external factor. - Reset procedure: Press [POWERÍ/I] (VCR/DVDÍ) to switch the unit to the standby mode and then back to ON. Alternatively, press [POWERÍ/I] (VCR/DVDÍ) to switch the unit to the standby mode, disconnect the AC power supply cord, and wait for 1 minute. Reconnect the AC power supply cord. - ≥Check the batteries are installed correctly. 11 ≥The batteries are depleted: Replace them with new ones. 11 ≥Point the remote control at the remote control sensor and operate. 11 Cannot select alternative ≥This function depends on software availability. - languages. ≥Try selecting from the disc's menu if one is available. 32 The SETUP menu cannot be ≥Switch [VCR/TV/DVD] to [DVD] . - accessed. ≥Cancel all program and random play. 36 Cannot operate the VCR. ≥Switch [VCR/TV/DVD] to [VCR] when operating VCR. - ≥The unit is in timer recording standby (" " is on on the unit's display). Press [TIMER ] 22 to operate the VCR manually. Cannot operate the TV. ≥Switch [VCR/TV/DVD] to [TV] when operating TV. - Cannot operate the DVD. ≥Switch [VCR/TV/DVD] to [DVD] when operating DVD. - Television reception worsens ≥This can occur because the signals are being divided between the unit and the television. after connecting the unit. It can be solved by using a signal booster, available from audio-visual suppliers. Consult your dealer if reception does not improve. - Cannot eject cassette. ≥The unit is in timer recording standby or actually recording. If you need to eject the tape, press [TIMER ] first so " " goes out. 22 No on-screen display. ≥Go to "OPTION" in the VCR MENU, and select "ON" for "OSD". 30 ≥Go to "Display" in the SETUP menus, and select "On" for "On-Screen Messages". 49 The menu is displayed in a ≥Go to "LANGUAGE" in the VCR MENU, and select the desired language for menus. 28 different language. ≥Go to "Disc" in the SETUP menus, and select the preferred language for "Menus". 49 The tape counter isn't changing. ≥The tape counter does not change while playing unrecorded parts. - On-Screen Menu Icons not displayed or only partially displayed on the television. ≥The display also appears like this if the tape is dirty or damaged. Consult your dealer if this is the case. - ≥Press [Cursor]34 while the rightmost icon is highlighted to move them down. 43 Sound No sound. Distorted sound. Piercing noise comes from the speakers. There is noise when playing a video tape. Effects do not work. ≥Check the connections. ≥Turn the volume up. ≥Ensure that the input settings on the other equipment are correct. ≥Turn ADVANCED SURROUND off if it causes distortion. ≥Output from this unit will be in stereo (2 channels) when ADVANCED SURROUND is on. Turn ADVANCED SURROUND off if you are using three or more speakers. ≥Noise may occur when playing WMA files. ≥If you have connected this unit to other epuipment through the DIGITAL AUDIO OUT terminal, ensure you have selected the correct settings for "Dolby Digital" and "DTS Digital Surround" in the SET UP menu's "Audio" menu. ≥Adjust the tracking. ≥The tape is old or damaged. ≥DIALOGUE ENHANCER and ADVANCED SURROUND do not work when the unit is outputting bitstream signals. 12 - - 41 41 47, 51 19 - - Helpful Hints 55