Panasonic AKHC1500G AKHC1500G User Guide - Page 11

ENGLISH Major operating controls and their functions  HD SDI output connector [HD SDI OUT] HD SDI signal output is given by this line.  G/L input connector [G/L IN] For gen-lock with the camera, the external sync signal (black burst) or tri-level sync signal is supplied to this input connector.  Cable clamp Clamp the DC power supply cable connected to the DC 12 V input connector  to prevent it from slipping out.  Optional card slot Slot for inserting an optional card. For details, refer to the manual for optional cards.  Cooling fan • Do not block or obstruct the ventilation during operation. It may otherwise cause internal heating or fire. • The life of this fan is approximately 30,000 hours (at room temp. 77°F (25°C)). Replace the fan as needed. (When the room temperature is higher than 95°F (35°C), replace the fan 30% earlier.) Be sure to ask the dealer for the replacement.  Interface connector [I/F] 5 15 10 1 11 6 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Gen-lock signal GND Time code signal input Not used TX_N (EIA422)/TXD (EIA232) output RX_N (EIA422)/RXD (EIA232) output Camera power supply input (DC +12 V) Gen-lock signal input GND TX_P (EIA422) output RX_P (EIA422) input GND Time code signal GND GND GND GND - 10 (E) -