Panasonic AW-SF100/SF200 AW-SF100 Installation Instructions - Page 4
Setting the Remote Camera, Setting of AW-UE150
View all Panasonic AW-SF100/SF200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
• Panasonic recommends a wired connection between the PC and remote camera. In the case of a wireless connection, sufficient tracking performance may not be achieved. • When using GPU for human body detection through deep learning, you must install CUDA Toolkit in the server pc. When using a GPU with Pascal architecture, please download and install CUDA Toolkit 8.0 from the website below. https://developer.nvidia.com/cuda-80-ga2-download-archive When using a GPU with Turing architecture, please download and install CUDA Toolkit 10.1 from the website below. https://developer.nvidia.com/cuda-10.1-download-archive 2. Setting the Remote Camera Before using this software, make settings on the remote camera main unit. As a method of acquiring images from remote cameras, it is possible to select either acquisition by JPEG image or acquisition by H.264 stream. When using acquisition by JPEG image, set the [Image capture type] to JPEG on the [Settings - Camera] screen of this software. When using acquisition by H.264 stream, set the [Image capture type] to H.264 on the [Settings - Camera] screen of this software. • Setting of AW-UE150 Tracking performance is higher when using acquisition with JPEG image. - When acquiring images with JPEG images Change [Setup] -> [Video over IP] -> [JPEG (1)] to the following settings on the web page of the camera. Image capture size: 1280 x 720 or higher Refresh interval: 15 fps or higher (NTSC), 12.5fps or higher (PAL) - When acquiring images with H.264 stream Change [Setup] -> [Video over IP] -> [H.264 (1)] to the following settings on the web page of the camera. H.264 transmission: On Image capture size: 1280 x 720 or higher Transmission priority: Frame rate Frame rate: 15 fps or higher (NTSC), 12.5fps or higher (PAL)