Panasonic BL-MS103PK User Guide - Page 157
Camera Images, Screen Display
View all Panasonic BL-MS103PK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
16 Troubleshooting the BL-WV10A 16.10 Camera Images, Screen Display Issue The image is unfocused. Images colors are wrong. I cannot turn Color Night View mode on/off. The shutter speed seems slow. Images are out of focus. The image is snowy. It takes tens of seconds for brightness levels to return to normal after a sudden change in brightness Causes and Solutions The lens is dirty. • Clean the lens using a cotton swab. The subject is too close. • The camera cannot properly focus on subjects less than 0.5 m (20 in.) away. Move the subject further away (at least 0.5 m or 20 in. from the camera). The white balance is set incorrectly. • Set the white balance in the camera's Setup screen (see page 109). This feature can be turned on/off for HCM cameras only by accessing the camera with a PC. For BL-C10A and BL-C30A, this feature turns on and off automatically. The camera's Color Night View mode is activated. • Brighten the camera's environment. • For HCM series users, access the camera with a PC and turn off Color Night View mode. It was dark when the image was shot. • Brighten the camera's environment. The power frequency settings do not match those of the camera. • Match the power frequency for the camera's location using the appropriate settings on the camera's Setup screen (see page 109). Flicker can appear in the image when shooting a bright subject. • Change the subject and the flicker should disappear. This reflects the camera's specifications. • Move the camera to a location where it will not be exposed to rapid changes in brightness. 156