Panasonic BT-L2150PJ Brochure - Page 3

3D Series FULL HD BT-3DL2550 This 647.7 mm (25.5 inches) LCD video monitor offers 3D compatibility in addition to superb basic HD display performance. It is ideal for high-quality, multifunctional 2D/3D monitoring at production sites. Connector: SDI 1 SDI 2 VIDEO YPBPR/RGB DVI-D SYNC/HD VD AUDIO PIN GPI RS-232C HEADPHONE Power: AC DC Xpol®*1 Polarizing Filter and 3D Polarized Eyewear for 3D Monitoring The Xpol®*1 polarizing filter, which arranges micro-polarizers in a precise array, is bonded to the front surface of the LCD panel. This allows the viewing of 3D images*2 displayed with the line-by-line method using 3D Polarized Eyewear. Two pairs of 3D Polarized Eyewear are supplied with the product. Additional 3D Polarized Eyewear (BT-PGL10G) is available as option. *1: Xpol® is a registered trademark of Arisawa Mfg. Co., Ltd. *2: Due to the characteristics of the Xpol®*1 polarizing filter, it is necessary to view 3D images from a position perpendicular to the LCD panel surface in order to properly perceive 3D effects. Three 3D Video Input Systems Supported The BT-3DL2550 supports three 3D video input systems: simultaneous, line-by-line and side-by-side. It accepts the output from the AG-3DA1 Integrated Twin-Lens 3D Camera Recorder and from existing 3D camera systems such as rig-type 3D camera systems as well as 3D TV broadcast signals, thus meeting virtually all production, editing and transmission needs. • Simultaneous: Outputs left- and right-eye images through separate SDI cables. This system transmits FULL HD 3D video signals. • Line-by-line: Allocates left- and right-eye images to odd-numbered lines and even-numbered lines. Conventional equipment for 2D video can be used with this signal type. • Side-by-side: Splits the screen into left and right halves, and then combines the left and right images for viewing. This system is used mainly for 3DTV broadcasts. Special 3D Display Function for a Rig-Type 3D Camera The BT-3DL2550 is equipped with a special display function for adjusting images acquired with a rig-type 3D camera system (mirror type or side-by-side type). The following display/adjustment functions support lens axis adjustment and color matching when receiving simultaneous dual HD SDI inputs from a rig-type 3D camera system. This allows the BT-3DL2550 to meet professional 3D production needs. • Display Selection: The screen display can be switched to normal 3D image display (line-by-line), overlay display, single-channel (left/ right) display or comparison display. - Overlay Display: Displays left- and right-eye images together. - Single Channel Display: Displays left- or right-eye image. - Comparison Display: Displays left- and right-eye images next to each other.* This display mode is suitable for color matching and gradation adjustment for left-eye and right-eye cameras. • Half Mirror Function: Inverts the right-eye image signal to flip the displayed image in the horizontal direction. This allows the 3D viewing of video input from a mirror type 3D camera system. • H Shift Function: Shifts horizontally the image of one channel in the left or right direction (i.e. that is horizontal image translation), while showing an overlay display. This function is convenient for lens axis adjustment. * The two screen images are the same in size and have an aspect ratio of 16:9. The Marker function cannot be used in this mode. Images of the Input Signal and Terminal Simultaneous Left Left Right Line by Line Left ɾ ɾ ɾ Side by Side Left Right Right HD SDI × 2 or HD SDI or DVI-D or HD SDI or DVI-D Display Image ̏D Line by Line Left Right 3D Polarized Eyewear Mirror type Camera head Rig - Object 3 Half-mirror Side-by-side type Object Camera head - Rig 3 Overlay display Comparison display Half-mirror display (H direction) H shift function (H direction) Overlay display Comparison display Half-mirror display (H direction) H shift function (H direction) Not necessary As of November, 2011 2