Panasonic BT-LH910G Brochure - Page 4

Diverse 3D Camera Assist Functions SDI1 (L) SDI2 (R) BT-LH910G *Picture simulated Conventional Rig-Type 3D Camera When the left-eye and right-eye video signals from a 3D camera are connected to the two SDI input terminals, the BT-LH910G lets you check 3D images on its 2D display. The BT-LH910G is also provided with a variety of functions to help adjust a rig-type 3D camera system. It helps to reduce preparation time for 3D shooting and boosts image accuracy. 3D Assist Functions Supported by Various Formats 1080/60i, 1080/59.94i, 1080/50i, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 1035/60i, 1035/59.94i, 720/60p, 720/59.94p, 720/50p • MIRROR: The Mirror function simplifies the basic adjustments of a rig-type 3D camera system. With the left-eye and right-eye images displayed side-by-side on the screen, the right-eye image can be flipped in the horizontal or vertical direction. • SHIFT: This function lets you move only the right-eye image horizontally or vertically in the overlay display. It's handy for checking angle misalignment between the left-eye and right-eye images. • COMPARISON: The Comparison function displays half-tone markers inside the left-eye and right-eye images displayed side-by-side. It lets you confirm that there are no missing image segments at the frame edge of only one image. • CONVERGENCE: With the left-eye or right-eye image displayed on the full screen, the Convergence function lets you switch the images automatically or manually. This makes it easier to confirm the convergence point. • COLOR: The Color function combines left-eye and right-eye images and displays them in a checkerboard pattern on a full screen. It allows you to check the brightness and color variance between the two images. • ZOOM FOCUS: This function enlarges and displays a section of images displayed side-by-side. It can be used to check the variance in focus and zoom between the left-eye and right-eye images. Focus-in-Red can also be used together with this function. • VERTICAL: The Vertical function lets you closely inspect vertical misalignment between the left-eye and right-eye images using an auxiliary horizontal-line marker. • OVERLAY: Using this function, you can check the width of the left-right disparity by superimposing a vertical-line marker (in 3% intervals) on the overlay display or difference image between right and left in black-and-white display. *The Overlay display on the BT-LH910G does not provide 3D effects even if 3D Eyewear is worn. System Connection with Camera Recorders Viewfinder Cable (for control signal) AJ-HPX3100G AG-HPX370 series DC Power BT-LH910G BNC Cable (for SDI) DC Power BT-LH910G BNC Cable (for 3G SDI) Camera with 3G SDI output HDMI DC Power BT-LH910G Camera with HDMI output such as AVCCAM SDI1 (L) SDI2 (R) DC Power BT-LH910G 3D camera such as AG-3DA1 DC Power BT-LH910G Signal Format for BT-LH910G Input Signal VIDEO VF-VIDEO VF-YPBPR YPBPR SDI1 (3G SDI) SDI2 NTSC ✓ ✓ PAL ✓ ✓ 640 x 480 (59.94Hz) 640 x 480 (60Hz) 480/59.94i ✓ ✓ ✓ ✓ 480/59.94p ✓ ✓ 576/50i ✓ ✓ ✓ ✓ 576/50p ✓ ✓ 720/50p ✓ ✓ ✓ ✓ 720/59.94p ✓ ✓ ✓ ✓ 720/60p ✓ ✓ ✓ ✓ 1035/59.94i*1 ✓ ✓ ✓ ✓ 1035/60i*2 ✓ ✓ ✓ ✓ 1080/23.98PsF ✓ ✓ ✓ ✓ 1080/24PsF ✓ ✓ ✓ ✓ 1080/25PsF*3 ✓ ✓ ✓ ✓ 1080/50i ✓ ✓ ✓ ✓ 1080/59.94i ✓ ✓ ✓ ✓ 1080/60i ✓ ✓ ✓ ✓ 1080/23.98p ✓ ✓ 1080/24p ✓ ✓ 1080/25p ✓ ✓ 1080/29.97p ✓ ✓ 1080/30p ✓ ✓ 1080/50p ✓*4 1080/59.94p ✓*4 1080/60p ✓*4 HDMI ✓ ✓ ✓ ✓: Supported *1: Displayed as 1080/59.94i when input is 1035/59.94i. *2: Displayed as 1080/60i when input is 1035/60i. *3: Displayed as 1080/50i when input is 1080/25PsF. *4: RGB444 and SDI422 (12 bit) are not supported. Option  As of March, 2011 BT-CS910G VF Cable