Panasonic CF18NDHZBVM CF18KDHZBVM User Guide - Page 17
Starting Up/Shutting Down
View all Panasonic CF18NDHZBVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Starting Up/Shutting Down Starting Up Latch B 2 1 Latch A Power Switch Power Indicator 1 Open the display. 1 Pull up latch A and release latch B. 2 Lift open the display. 2 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it. CAUTION While booting, avoid the following until the hard disk drive indicator has turned off. • Connecting or disconnecting the AC adaptor. • Touching the power switch or the tablet buttons. • Performing any keyboard, touch pad, digitizer (or external mouse) opera- tions. • Closing the display. Once the computer is powered off, you must wait at least ten seconds before powering it on again. When using this computer with the battery pack only, it may take some time for the power to turn on after sliding the power switch. In this case, slide the power switch and hold it for more than one second. This phenomenon occurs because the standby power is minimized while the power is turned off; it is not a malfunction. When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support. NOTE When the power is turned on in a low-temperature environment, sometimes the message "Warming up the system. Please wait..." is displayed (up to 25 minutes) or the battery indicator alternately blinks green and orange. This function is designed to prevent hard disk drive malfunctions that may occur at low temperatures. Wait for the computer to start up. Operation 17