Panasonic CT13R37S CT13R17B User Guide - Page 4

TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting. "TO MEMORIZE CHANNELS" cannot be selected if the AV mode is selected. TV/CATV SELECTION 1 Press ACTION and press ACTION. to select the SET UP mode, then press PICTURE TIMER EXIT LOCK SET UP 2 Press w to select MODE mode and then press . Then press or to select the TV or CABLE mode, then press ACTION. SET UP 3 Press ACTION twice. LANGUAGE / IDIOMA / LANGUE MODE : CABLE AUTO PROGRAM MANUAL PROGRAM CC : OFF NOTE: / / / ACTION Contact your cable company to determine the type of cable system used in your area. AUTOMATIC CHANNEL MEMORY 1 Press ACTION and press to select the SET UP mode, then press ACTION. 2 Press w twice to select AUTO PROGRAM mode and then press . The TV will begin memorizing all the channels available in your area. 3 Press ACTION twice. SET UP LANGUAGE / IDIOMA / LANGUE MODE : CABLE AUTO PROGRAM MANUAL PROGRAM CC : OFF / / / ACTION MANUAL CHANNEL MEMORY 1 Press ACTION and press to select the SET UP mode, then press ACTION. 2 Press v twice to select MANUAL PROGRAM mode and then press . 3 Select the desired channels to be added or deleted using Direct Channel Selection (10 keys. 0-9), CH v or w. 4 Press or to select ADD or DELETE. If an unmemorized channel was selected (step 3), the channel indicator will be yellow. Press or if you wish to ADD the unmemorized channel. The channel indicator will change from yellow to blue when a channel is added and the channel will be memorized. If a memorized channel was selected (step 3), the channel indicator will be blue. Press or if you wish to DELETE the channel from memory. The channel indicator will change from blue to yellow when a channel is deleted. Repeat Steps 3 and 4 for each channel to be added or deleted. 5 Press ACTION three times. SETTING TIMER You can set the TV to turn off after a preset amount time. 1 Press ACTION and press to select the TIMER mode, then press ACTION. 2 Press and then press or to select desired time, then press ACTION. SET UP LANGUAGE / IDIOMA / LANGUE MODE : CABLE AUTO PROGRAM MANUAL PROGRAM CC : OFF / / / ACTION ADD CH 012 TIMER SLEEP : 10 / / ACTION After the timer is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the timer function is operating. To confirm the timer setting, repeat step 1. The remaining time will be displayed. To cancel the timer setting, select the OFF. ADJUSTING PICTURE You can adjust the settings for color, sharpness, contrast, brightness and tint. 1 Press ACTION twice to select the PICTURE mode. 2 Press v or w to select desired picture, then press . 3 Press or to adjust the setting. COLOR TINT BRIGHTNESS PICTURE SHARPNESS more vibrant color greenish hue increase brightness increase contrast makes picture clearer reduces color reddish hue decrease brightness decrease contrast makes picture softer TO RETURN TO INITIAL SETTING Select the NORMAL then select SET as in step2. CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only. Press the TV/VIDEO to select the AV mode to use the TV as a monitor. Operate your VCR as usual. NOTE: TV/VIDEO only exists in the remote control. TV/AV SELECTION If you connect the TV to a VCR, camcorder or TV game, through the audio/video in jacks, use the TV/VIDEO to make your selection. Press the TV/VIDEO repeatedly to select the desired mode. "AUX" will display on the screen for 4 seconds. 2. To connect the TV to a TV Game The TV can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information. AUX To Audio/Video OUT Front of TV TV GAME CHANNEL VIDEO IN AUDIO IN 1. To connect the TV to a VCR VCR Front of TV CHANNEL VIDEO IN AUDIO IN To Audio/ Video OUT VIDEO (not supplied) AUDIO (not supplied) 3. To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the TV as shown. To AV OUT Front of TV jack CHANNEL VIDEO IN AUDIO IN (not supplied) TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS TV does not operate Poor sound or No sound Poor picture or No picture Poor reception on some channels Poor color or no color Picture wobbles or drifts No CATV reception Horizontal or diagonal bars on screen No reception above channel 13 No Remote operation TV shuts off Cannot see closed caption Display is not shown in your language POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. • Station or CATV experiencing problems, tune to another station. • Check sound adjustments (VOLUME and MUTE). • Check for sources of possible interference. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Check antenna or CATV connections, adjust antenna. • Check for sources of possible interference. • Check picture control adjustments. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Station is weak, adjust antenna to receive desired station. • Check for sources of possible interference. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or CATV connections, adjust antenna. • Check for sources of possible interference. • Station or CATV experiencing problems, tune to another station. • Make sure channels are set into memory. • CATV company is scrambling signal. • Adjust antenna. • Check all CATV connections. • Set TV/CATV menu option to the CATV mode. • Station or CATV system problems, try another station. • Check antenna connections, adjust or re-direct antenna. • Check for sources of possible interference. • Make sure TV/CATV menu option is in the appropriate mode. • If using antenna, check UHF antenna connections. • Batteries are weak, dead or inserted incorrectly. • Remote is out of range, move closer to TV (within 15 feet). • Make sure Remote is aimed at sensor. • Confirm there are no obstructions between the Remote and the TV. • Make sure the power cord is plugged in. • No broadcast on station tuned. • Timer is set. • Power interrupted. • TV station experiencing problems or program tuned is not closed captioned. Try another channel. • Check CATV connection or VHF/UHF antenna, reposition or rotate antenna. • Select the Closed caption. • Select proper language in the SET UP mode. SPECIFICATIONS AC Power Input: AC Power Consumption: Chassis Construction: Picture Tube: Horizontal resolution: Audio Power Output Rating: Speaker: Tuner Type: Remote Control: Receiving Channels: Antenna Input Impedance: Input: Dimensions: Weight: 120V, 60Hz 54 Watts IC Solid state 13" (measured diagonally) 260 lines 1.0 Watts 1-1/2"x2-1/2" Full Range, 8 ohm 181 Channel, Quartz PLL Frequency Synthesized Infrared, Direct Access, 2 x AA batteries (not supplied) VHF 2-13 UHF 14-69 CATV 1-125 75 Ohm (VHF/UHF/CATV) Coaxial Input Video: 1.0 Vp-p 75 ohm Audio: 300 mV, 47k ohm 14-1/8" (W) x 13-15/16" (D) x 13-1/4" (H) 20.9 Ibs ACCESSORIES Remote Control Telescopic Antenna Batteries (2xAA)